PDA

View Full Version : Clutch Switch Questions



CMac89
03-23-2010, 05:49 PM
I'm trying to figure out the clutch switch wiring for the WOT Box. I checked voltage to the wires (clutch up and down) and I'm not getting voltage to either of the large red/blue wires, and one other wire. For the gray/yellow, I'm getting a constant voltage. For the red/green, it gets power whenever I take the play out of the clutch pedal, but I don't have to disengage the clutch at all to get power to it (loose contact I guess.)

The tricky part is that the motor won't turn over unless I have the clutch disengaged. Any thoughts?

CMac89
03-24-2010, 10:47 PM
Ttt (edited)

ricardoa1
03-25-2010, 10:47 AM
I think the large wires only come on when you are cranking the vehicle. I dont think they are alive any other times.

Breadsax
03-26-2010, 12:46 PM
On an 89 I believe the first two are for starting in neutral purposes. The third and fourth are for cruise control.