SOLD: Cam, springs and push rods

fturner

Registered User
I have a mild regrind cam that Dave Dalke did for me 2 years ago that I've had in my car until now.... about 10000km's on it. The specs are

Lift: Int .493 Ex .529 with 1.73 rockers
Duration: Int 204 Ex 206
Lobe Sep: 112

This is considered an extreme energy cam so there's still alot of power in the low rpm range, and in fact you'd never know this cam was in your car at idle and part throttle driving... want stealth this is it.

My car made about 275rwhp with stock heads and a bit over 300rwhp with ported heads. The cam is good to about 5500 rpm's and up to about 16psi of boost.

The springs included are needed as the stock springs will bind with the lift. The push rods are the correct length for stock rockers and valves.

I'm looking at getting $250CDN for everything plus shipping.

Fraser
 
Back
Top