FIRM MODE Stuck on w/switch on auto 94sc

Mine was the brake pressure switch near the drivers side firewall was bad. Rather than replacing it, I just disconnected it and it works good without it. It just doesn't go to firm mode from hitting the brakes hard anymore...
 
Thanks, Jared.

Today, for the first time, it came out of FIRM MODE. It did it only for a short while. It was when I came to a stop with the brake pedal depressed.

After I let off the brake pedal, it went back to FIRM MODE and has not changed since.

I inspected the brakes and found that one of the rear pads has loose rivets. Not sure if this is the problem, but I will be replacing them today.

Update to follow.

Theodore
 
Back
Top