My stock IAC runs fine with the exception of holding the car idle a bit high. About 1k when it should be around 750. Also the IAC tends to hold the idle up longer than I like after revving. In the past I've tried to run 2 new IAC from aftermarket venders only to have the car run poorly. Both new IAC would not allow the car to idle right at all, even after doing the IAC adjustment.(one made the car run so rough I thought it dropped a cylinder) Does anyone know of a reliable source for IACs!! As it stands right now with the stock one installed I have the TB position screw set all the way back so it barely touching the throttle stop. The idle air bleed screw is bottomed out, so no air is getting by. The TB is an early production 75mm BBK.(or was it 80?) When I disconnect the IAC the idle barely drops at all. I'm thinking the stock unit is bleeding air in the closed position and this is why I want to replace it.
Thanks
:Kragens has the E9SZ 9F715 EA unit for 120$! ouch really worth it? :
Thanks
:Kragens has the E9SZ 9F715 EA unit for 120$! ouch really worth it? :
Last edited: