are the rear wheel bears pressed in
Ddubb Registered User May 9, 2010 #2 Yes, you will need at least a 12 to 20 ton shop press to get the Hub and bearing removed from the knuckle. Chances are if your bearing is toast, the Hub may be chewed up also. - Dan
Yes, you will need at least a 12 to 20 ton shop press to get the Hub and bearing removed from the knuckle. Chances are if your bearing is toast, the Hub may be chewed up also. - Dan
Mike8675309 Registered User May 9, 2010 #3 How to info can be found here: http://www.sccoa.com/articles/rearwheelbearing.php