PBR brake conversion...for my 89sc, anyone done this

I have decided I am not going to bother putting single piston calipers back on my SC after reading this article on the TCCOA:

http://tccoa.com/articles/brakes/kvr_install/index.shtml

Has anyone done this before to there SC's? Where did the calipers come from, are they 2000 up Mustang from calipers?

Thanks,

Phil

This subject has been addresses MANY times before on the board. Do a search and some research. I bought mine from discbrakesrus.com

phils89sc said:

IHas anyone done this before to there SC's? Where did the calipers come from, are they 2000 up Mustang from calipers?

Click to expand...

Many have, I bought my PBR's from the junkyard, cleaned/painted them up and installed them along with new pads and cross drilled slotted rotors, they work great.

I did the swap a few years ago and was definately worth it. At first I picked up junk yard calipers from a 2000 GT, but they were froze up so I have to get a set of reman calipers. I reused my stock rotors and used semi metallic pads. I also installed SS brake lines at the time and flushed the entire system with ATE fluid.

You do know 89-92 Tbirds have to swap spindles to the 93-97 ones for the upgrade.