Supercharger gasket sealant

SilverCasket

Registered User
I just received the Magnum Powers complete setup and I have never taken my car aparts before, so I am wondering how to put it all together.

What do I use (such as gaskets) to seal the 85mm throttle body to the Inlet plenum, & plenum to back of charger, & SC Top to SC...

Is there gaskets or just a sealant?

Thanks,
Anthony
 
sealan

There are people out there that have ported blower and inlets that are beyond stock gasket size. So they are using atv. The copper is one to use.

Raymond
 
gasket sealer

the top to s/c body uses a red loctite type that will harden after assy (after squeezed to remove air) wipe of excess after tightening or the stuff attracts all manner of funk as it won't harden.
 
FelPro makes a gasket that can be bought at your local O'Reillys etc for installing the throttle body, I have a few of them in the shop and can give you the part number if you need it. For the inlet plenum to supercharger & top you can use Loctite #518.

(/shameless plug mode on)
For the collar nut and other ic connections...

icset54.jpg


:)

'bird
 
Back
Top