madebyme
Registered User
I had a set of the billet rims from a Mustang sitting in my garage for years. Of course the bolt pattern is different so I bought a set of spacers that change the pattern. LOVE how the back looks but the fronts hang out a half inch or so and detract from the lines. Since deciding to keep the car, I want to keep it in as as original condition as possible. I don't want to change anything that can't be undone in a simple manner. So what are my options?
My first thought was to plane the adapters, but that would result in strength issues. Second, I thought of re-drilling a set of TBird hubs and getting Mustang rotors. Lastly, does anyone know of a set of front Mustang hubs and rotors that will bolt up with no modification? I did scan posts but didn't find anything difinitive...
My first thought was to plane the adapters, but that would result in strength issues. Second, I thought of re-drilling a set of TBird hubs and getting Mustang rotors. Lastly, does anyone know of a set of front Mustang hubs and rotors that will bolt up with no modification? I did scan posts but didn't find anything difinitive...
Last edited: