PDA

View Full Version : The 95 LX is getting an SC



Roadhawg
07-11-2010, 05:18 PM
I picked up a 96-98 SVO supercharger and it will be going on the wife's 95 LX. It may not be the ultimate in Mods, but it will make daily driving a bit more fun.

nickleman60
07-11-2010, 09:00 PM
When is the install happening?

Roadhawg
07-11-2010, 09:38 PM
When is the install happening?

I guess after I get motivated and drop the fuel tank and install a 255lph pump. I figure when I am under there I will throw in that aluminum driveshaft also.

frdlvr30
07-11-2010, 09:54 PM
I thought you put PI heads on that car? Or was that just your Bro's Mustang?

Roadhawg
07-11-2010, 09:59 PM
I thought you put PI heads on that car? Or was that just your Bro's Mustang?

PI heads are on my brother's stang. The Tbird is a low compression NPI engine.

frdlvr30
07-12-2010, 10:10 PM
Ahh that makes more sense then...I thought the Mad scientist was fabbing something to mate an NPI intake system/ Blower to PI head intake ports....THought they both were Power improved not just the Stang...I know you did something....Wired it for coil on plug then ....or something....

Roadhawg
07-13-2010, 07:17 AM
I know you did something....Wired it for coil on plug then ....or something....

I installed COPs and Steeda underdrives.
I also replaced the heads with a set of 96 Mustang NPI heads, after the original heads spit out a sparkplug and the threads.

frdlvr30
07-13-2010, 12:26 PM
I installed COPs and Steeda underdrives.
I also replaced the heads with a set of 96 Mustang NPI heads, after the original heads spit out a sparkplug and the threads.

Ahhh yes now I remember...

Roadhawg
07-26-2010, 08:19 PM
I am almost ready to install the SVO supercharger................

I installed a 255lph walbro and while I was under the car I threw in a Mark8 aluminum drive shaft.

frdlvr30
07-26-2010, 10:32 PM
I am almost ready to install the SVO supercharger................

I installed a 255lph walbro and while I was under the car I threw in a Mark8 aluminum drive shaft.

What injectors are recommended? You using? 36?

Roadhawg
07-27-2010, 07:06 AM
What injectors are recommended? You using? 36?

I am using 30lb injectors, the same ones Ford SVO used.
I figure they will be enough, as I do not plan on going much over 300hp.