Custom Carbon Fiber Wrapping

bigpoppa822

Registered User
Hey everyone, I decided to add some custom touches to my interior and carbon fiber wrap some trim pieces. I used real 2x2 weave carbon fiber and shaped it over the pieces using 3M super 90 as an adhesive. This took a lot of time and patience and I'm still learning as I go along. Thought I'd share some pics.

Here's my driver's side door cup on a test fit:
5fLEul.jpg


And here's where I left off tonight, ignore the frillies on the window switch it's not done yet:

AjIC7l.jpg


I'll post some more pics as I progress. What do you think?
 
Like it :)

I want to see the horizontal center of the dash (early models)...instead of the aluminum.

I'd be interested in a set of door cups like that if you start production...
 
Like it :)

I want to see the horizontal center of the dash (early models)...instead of the aluminum.

I'd be interested in a set of door cups like that if you start production...

I really like the aluminum but that's actually a really good idea. I may have to try it.
Probably not going to make any more, the work is really tedious and I'm sure they aren't worth much. If you want info on where I got my CF and want to try yourself send me a PM.
 
I thought about doing that awhil eback. Bet it will look great when done. You should make a techpost on the procedure
 
Back
Top