the easyest way to?

change the plugs and wires what tools are needed and what is needed to take off or do i have to go from under the car anything like that would help thanks for your help.

I did it this way

Hope this helps
I changed mine by going underneth the drivers side and reaching and getting them out

On the passenger side you have to go underneth to get the two back plugs the one on front you can remove the intake tube and get to it

You need a plug wrench and lots of Bandaids and a few bad words good luck

You'll need a 5/8" socket with a 3/8" drive ratchet and some dialectric grease for the wires (to put on the contacts).

You'll also want a gapping tool and gap to .054" for stock.

re

Just did mine today, didnt have to use a lift. only thing we removed was the intake tube/cone

Took us about 2 hours.