Motohead
SCCoA Member
I have a fresh professionally rebuilt engine with new pistons bored block all tollarences were checked during assembly It has about 1000 miles on it I checked the oil level and noticed it was overfilled (almost 2 quarts) the oil looked thin on the dipstick I changed the oil and it seemed thin and smelled of gas I have put about 50 miles on the car and the level appears to be rising again. Maybee 1/4 quart over. My injectors were tested and flowmatched at installation. I have run a leak down test at the fule rail and it holds pressure. The car isnt smoking and running well any ideas what could be causing this?