Will this fit on our 3.8's

You need a plate setup for 3/4-16 to bolt on to an SC oil pump. If you add a cooler you can delete the stock cooler that is bolted there. If you take a look, you may find that the angle isn't ideal for straight fittings.
 
They have one.

You need a plate setup for 3/4-16 to bolt on to an SC oil pump. If you add a cooler you can delete the stock cooler that is bolted there. If you take a look, you may find that the angle isn't ideal for straight fittings.

Mike, they do have a 3/4-16 adapter and I am NOT currently using the original oil cooler, since the motor is out and being rebuilt, I thought it would be agood time to see if it would work to make a very easy connection for an oil pressure/temp gauge provided it can fit in our location!

Thanks for the measurements just the same!

Smitty
 
I think that according to your mods, you may be able to fit that in prior to installing the cover...I don't think it will spin in place otherwise.
 
Back
Top