PDA

View Full Version : If you have a stuck crank bolt I have the tool to remove it!!



unrapit
09-02-2010, 04:11 AM
My bolt broke off in the crank and I had to drill it and use an e-z out to remove it.I have my own lathe so I built a jig that fits on the crank so it can be drilled in the center.You can do this in the car without removing the radiator.Just the fan I removed.Works great!If anyone needs to use it let me know.Thanks

sinhumane
09-02-2010, 08:11 AM
<---- this guy... i got a 95 with a limp crank pulley. i get home from iraq around the end of october. will get with you then.

92sclikenew
09-02-2010, 05:49 PM
My bolt broke off in the crank and I had to drill it and use an e-z out to remove it.I have my own lathe so I built a jig that fits on the crank so it can be drilled in the center.You can do this in the car without removing the radiator.Just the fan I removed.Works great!If anyone needs to use it let me know.Thanks

should tho some pics up..

i dont need to tool but would be cool to see what its about..

sts70004
05-19-2012, 07:14 PM
Old post I know but what I did was wrap the drill bit in paper till it fit snugly. Worked perfect