PDA

View Full Version : Shootout Stuff For Sale



TSC89
09-10-2010, 03:12 PM
Post up your stuff "For Sale" you would deliver to the Shootout.

kenewagner
09-10-2010, 04:29 PM
It looks like I will have (2) double ICs for sale at the shootout;)

Ken

shoalcracker
09-10-2010, 06:03 PM
Bit of a laundry list for early model.

1) Tan Interior for Cdn Seat Belt Conversion

2) Ripper Shifter...Factory Ford Shifter

3) Power Steering Pump

4) EGR Tube and Valve

5) New in box Std Products EGR Valve

6) Coil Pac x2...DIS x2

7) Timing/WaterPump Housing

8) Non Dimmer Headlight Stocks x 2

9) 5 spd Console Boot- Comes with Console

10) Never turned Flywheel with Bolts and Inspection Plate

11) CentreForce Dual Friction Clutch....Original Ford Clutch sandblasted ready for resto

PM with Email when pics are requested

Paul

Mercutio
09-10-2010, 06:51 PM
All parts are used, pm for more info.

3.27 TL pumpkin, complete
Bill Hull shorty headers
Many gray interior pieces for an 89-93
Gray tweed/leather seats, front and rear
Stock JBL cassette/amp/speakers
Stock 93-95 SC wheels/tires
Stock LX salad shooter wheels/tires
2 sets IC tubes
1-3/8 front sway bar & bushings (no other hardware)

If I find anything else I'll post it.

Mercutio
09-10-2010, 06:52 PM
PARTS WANTED:

Console top coin holders. These are the little plastic bits that came in the 94-96 LX and I don't know what else. They hold about 6 quarters each and fit into the same size slot as our fog light/firm ride switches. I need 2 in black.

chadder1313
09-10-2010, 08:57 PM
Wanted: Cup holder for the factory CD player location. PM me if ya have one. Thanks

Plat0ribs
09-10-2010, 11:32 PM
I'd love to bring home everything I need to convert a 91 into a 5-speed.

I've got 3 AOD's one doesn't shift past 2, the rest are of believed good but no evidence. 3 sets early SC rims, I may want to keep 1, a set of old skol borbet type H (discontinued), a few other bits and pieces. If you gots the 5-speed stuff name your price/parts U want!

DrFishbone
09-12-2010, 10:34 AM
WANTED: 89-93 Canadian manual seatbelt conversion "kit" in black - do not need speaker covers

XR7Kurt
09-12-2010, 11:24 AM
For sale, all parts are used:

1993(one piece) Mark VIII aluminum driveshaft $65
Early model stock harmonic balancer $75
(2) early model superchargers $90 each
(2) intercoolers $50 each
Catless downtubes for midlength headers $75
3.08 traction lok pumpkin, needs interface hub $50
Complete set of SC shocks/struts with arc actuators and front springs $75

I have other small stuff I'll have to add when I get home.

nickleman60
09-12-2010, 12:09 PM
I have a few parts for sale that I can bring to the Shootout:

$100 - 145 mph speedo, replaced odometer gears gears, 159940 showing.
$40 - Screamin Demon coil
$50 - Complete early model gauge cluster
$10 - (2) Boost/fuel gauge, price is for 1
$40 - '94 SC gauge surround
$40 - motor mounts with brackets, fluid filled ones with 3k on them

I'll add some pics tomorrow along with any other items I can dig up.

DrFishbone
09-12-2010, 12:36 PM
MN12 Performance Polyurethane Front Suspension Kit (minus Ford Strut Rod Bushings) (New - never installed.) $150

Mid-length headers (Kooks?) w/O2 sensors - Need some TLC - $150

Eibach Lowering springs (Rear only) - $50

Black Leather Door panels w/inserts - $100

Black Leather Door panel inserts and rear speaker covers - $75

RARE WHITE Leather Door panel inserts and rear speaker covers - $125

94/95 SC Rear Taillight Set - $80

Early Model supercharger - Needs snout rebuilt, rotors & case in great shape - $75

Early model Stainless center caps (some slightly-more-than-light scratches) - $20

Mark VIII 80mm MAFS w/electronics - $50

GFX (side skirts) red or white: $80

3.27 TL rear end (painted black) - $150

Red interior pieces (see post for details): Red Interior Parts Listing (http://sccoa.com/forums/showthread.php?t=114901)

Any large or heavy parts need to be paid for before the shootout.

I also have many 89-93 SC stock parts - let me know if you need something in addition to the above and I might throw it in for free. ;):D

Thomas A
09-14-2010, 07:20 PM
WTB: Stock early cast heads, unported.

Thomas

Regul8r
09-14-2010, 10:45 PM
WTB: Stock early cast heads, unported.

Thomas

Stock Cast HEADS???

super red91
09-15-2010, 09:01 AM
17" Moda R6 wheels with tires...

http://www.sccoa.com/forums/showthread.php?t=116328

SCrazy
09-15-2010, 09:16 AM
MPII and Chrome MP Inlet Plenum
Flaming River Steering Joint
Addco 1-1/4" Sway Bars
Heartland PS Pulley

DrFishbone
09-15-2010, 11:22 AM
Hmm...maybe I should just make a post in the Classified. :rolleyes:

3.73-geared rebuilt rear-end - supposed to be low miles on rebuild. I have the receipt from the shop the previous owner used. $300

Factory-looking T-Bird spoiler (off a base T-Bird, needs paint) - $50

93 black dashboard - good shape overall, has two small places where the vinyl was "patched" that don't look too awesome (near sliding storage area on early model dashes). No cracks/sun damage. w/wiring, etc. : $100 w/o wiring etc: $80 (PM for delivery, details, and/or pictures installed)

Can also possible get Mark 8 Rear end: $150 (w/stock gears) or $125 (w/o stock gears), Mark VIII Rear Lower control arms w/bolts: $100 (pr), one-piece driveshaft: $65 (let me know soon)


I have many blue, black, and red interior parts for 89-93 cars...let me know if you need anything.

Kurt K
09-17-2010, 12:26 AM
early style Kirban adjustable fuel pressure regulator. Installed about 3 years ago (less than 2000 miles). I upgraded to a remote-mount Aeromotive fuel pressure regulator and no longer need this. Taking offers and obviously can bring it to the Shootout.

David Neibert
09-17-2010, 03:27 PM
I've got a Magnum Powers return plenum adaptor that it was part of my MP FMIC that I'm no longer using. It's the aluminum piece that bolts to the return plenum to adapt a silicone coupler and clamp for 2.5" lower IC pipe, in place of the stock lower IC tube. It's a great part for anyone who is building their own FMIC or IC tubes.

{SOLD}

David

Nettlesd
09-17-2010, 03:52 PM
I have some old shirts/pants for sale. Any takers?

DrFishbone
09-17-2010, 04:30 PM
I have some old shirts/pants for sale. Any takers?

What size?

mywhite89
09-17-2010, 05:06 PM
I just upgraded the front brakes on my 89 SC. I have about 6,000 miles on the pads and rotors. Selling, pads, rotors, and calipers $100

Chris

XR7 Dave
09-17-2010, 05:09 PM
Matt, you bringing a semi-trailer? :eek:

DrFishbone
09-17-2010, 05:58 PM
Post up your stuff "For Sale" you would deliver to the Shootout.

*would* deliver ;)

If I had a trailer and a truck, I might bring everything.

If people want some of the big stuff, I'll make sure it gets there. :)

CMac89
09-17-2010, 08:10 PM
I have an 8" PermaCool fan used for stock intercoolers and a new solid M90 snout coupler.

Nettlesd
09-17-2010, 10:47 PM
What size?

I believe 34 waist on the pants and 16.5-17 neck size on the shirts. I have some old Kleenex tissues with only one blow used on them. I'm sure they are good for 2-3 more blows, at least.

Make offer.

XR7 Dave
09-17-2010, 10:50 PM
I believe 34 waist on the pants and 16.5-17 neck size on the shirts. I have some old Kleenex tissues with only one blow used on them. I'm sure they are good for 2-3 more blows, at least.

Make offer.

Jeans or slacks? I got plenty of kleenex.

seawalkersee
09-19-2010, 04:26 PM
WTB: Stock early cast heads, unported.

Thomas

For you, I have those heads you are seeking. Let me know.

SWS

DrFishbone
09-19-2010, 05:35 PM
I believe 34 waist on the pants and 16.5-17 neck size on the shirts. I have some old Kleenex tissues with only one blow used on them. I'm sure they are good for 2-3 more blows, at least.

Make offer.

Hey...just my size...can you post some pics?

I'll pass on the Kleenex tissues too. Maybe they should be included with the "worst break-down" cash. :p

JJP90SC
09-19-2010, 05:37 PM
Wanted: Cup holder for the factory CD player location. PM me if ya have one. Thanks

Chad,
You have a PM.
Thanks!
Jeff

Nettlesd
09-19-2010, 08:57 PM
Jeans or slacks? I got plenty of kleenex.

Abercrombie, Ralph Lauren and Tommy Slacks.

36" - 2 pairs (these might run a little small)

35" - 2 pairs

34" - 16 pairs

33" - 2 pairs

32" - 1 pair

http://i133.photobucket.com/albums/q54/nettlesd/Pants/DSC03000.jpg

Micahdogg
09-19-2010, 11:31 PM
Robert Green Racing ported heads + port matched lower intake + Crane stage 1 cam (208 duration, .509 lift) + matching pushrods.

Ran 12.42 with this stuff. $350 for everything.

Edit - Sold and being delivered at shootout.

DrFishbone
09-19-2010, 11:35 PM
Abercrombie, Ralph Lauren and Tommy Slacks.

36" - 2 pairs (these might run a little small)

35" - 2 pairs

34" - 16 pairs

33" - 2 pairs

32" - 1 pair

http://i133.photobucket.com/albums/q54/nettlesd/Pants/DSC03000.jpg


Will these pants allow me to butt-dyno-tune my car?

BLOWN38
09-20-2010, 12:17 AM
Robert Green Racing ported heads + port matched lower intake + Crane stage 1 cam (208 duration, .509 lift) + matching pushrods.

Ran 12.42 with this stuff. $350 for everything.

Humm, I interested in this. What blower was the 12.4 on? What you run with the m90?

nmcbchief
09-20-2010, 12:27 AM
Robert Green Racing ported heads + port matched lower intake + Crane stage 1 cam (208 duration, .509 lift) + matching pushrods.

Ran 12.42 with this stuff. $350 for everything.

Bring it to the shootout and I will take it off your hands.

SCme94
09-20-2010, 06:22 AM
ASP underdrives $100
50# injectors $120
Mint 94-95 EGR tube $75

XR7 Dave
09-20-2010, 08:15 AM
Robert Green Racing ported heads + port matched lower intake + Crane stage 1 cam (208 duration, .509 lift) + matching pushrods.

Ran 12.42 with this stuff. $350 for everything.

Um, I already bought the cam kit off you. Stop trying to hawk my stuff. :p

mywhite89
09-20-2010, 08:17 AM
wtb: My Canadian friend who brings down the Labatts Blue light for my dad!

Nettlesd
09-20-2010, 09:56 AM
Will these pants allow me to butt-dyno-tune my car?

Yes, you can't get nicer pants to butt-dyno-tune your car in. I mean, we're talking Ralph Lauren (Polo) dress slacks here so you'll be styling when using these pants.

Micahdogg
09-20-2010, 10:07 AM
I had the 1.7L AR blower. Before that I had a S model with 10% overdrive and dynod 286 RWHP, but only ran 13.8's at 102. That was before I took Casey's driving school.

SCrazy
09-20-2010, 10:36 AM
I had the 1.7L AR blower. Before that I had a S model with 10% overdrive and dynod 286 RWHP, but only ran 13.8's at 102. That was before I took Casey's driving school.

I thought you would be selling Kurt's missing sockets???

Kurt K
09-20-2010, 11:32 AM
I thought you would be selling Kurt's missing sockets???
No worries Brian, I've rolled their costs into his invoice....apparently lift rental is more than he thought:eek:

Kurt K
09-20-2010, 11:52 AM
94-95 S-model supercharger purchased new from Magnusen about 30k miles ago. 5% pulley (I think) and matching Magnum Powers Inlet. It has been sitting in my basement since installing my AR 2 years ago.

This setup has gone 12.62 on my 92 SC.

$750 + actual shipping

or

for a quick sale, delivered to the Shootout for $650

DrFishbone
09-20-2010, 01:02 PM
Added some more stuff to the list....

DrFishbone's SC Flea Market (http://sccoa.com/forums/showthread.php?t=116434)

I am NOT bringing everything...so if anybody wants anything let me know and I'll bring it up.

Cobrarthunder
09-20-2010, 08:16 PM
PARTS WANTED:

Console top coin holders. These are the little plastic bits that came in the 94-96 LX and I don't know what else. They hold about 6 quarters each and fit into the same size slot as our fog light/firm ride switches. I need 2 in black.

I got you covered on those! Don't let me forget.

TSC89
09-22-2010, 01:49 PM
I have a pair of Lincoln Mark VIII Lower Control Arms with bolts and spring adapters.
These are off of a Mark VIII that had the airbags removed.
$125 delivered to the Shootout. I am not bringing them to Shootout unless someone wants them.

seawalkersee
09-22-2010, 02:41 PM
I have a pair of Lincoln Mark VIII Lower Control Arms with bolts and spring adapters.
These are off of a Mark VIII that had the airbags removed.
$125 delivered to the Shootout. I am not bringing them to Shootout unless they are sold.

I can't wait 'till you leave town. I will be able to go to the yards and get all kinds of goodies that you usually steal before I get there.:p

SWS

TSC89
09-22-2010, 03:54 PM
I can't wait 'till you leave town. I will be able to go to the yards and get all kinds of goodies that you usually steal before I get there.:p

SWS


Enjoy those few days. I have a list to fill when I get back!:D

ganuolfthegrey
09-22-2010, 10:50 PM
I would like $100 bucks for it. will deliver to the shotout

ganuolfthegrey
09-23-2010, 09:30 AM
here are the other pics ,it pending sale

mywhite89
09-24-2010, 09:11 AM
I've got aluminum mark Viii rear clower control arms with the aluminum perches, never installed. Any offers??

ganuolfthegrey
09-26-2010, 12:02 PM
top was sold

ganuolfthegrey
09-26-2010, 12:15 PM
seat track full power pass side and ebrake handle i can bring make offer's
I converted my pass side seat to a manual seat track has 111,000 mile's on it but works great.

Plat0ribs
09-26-2010, 02:02 PM
If anybody from Northern Illinois will be trailering back from the Shootout I could use enough room to transport a 5-speed transmission, driveshaft and a box of the rest of the 5-speed swap stuff, I'd gladely subsidize your fuel bill.

Hopefully the parts are being sent up from Florida by superchargit in Ocala with one of the guys for whom he built a 5-speed car.

Thanks in advance to anybody who steps up to help out.;)

Chris/Plat0

BLOWN38
09-26-2010, 11:16 PM
Anyone have a bright red 94-95 OEM front bumper cover they can bring?

BLOWN38
09-28-2010, 10:24 PM
Anybody interested in black leather sho seats? The ones that used to be in Miki's car.

Thomas A
09-28-2010, 10:34 PM
Anybody interested in black leather sho seats? The ones that used to be in Miki's car.

Would you happen to have the rears from the SHO? I'm guessing not....

Thomas

BLOWN38
09-28-2010, 11:03 PM
No sorry............

chadder1313
09-30-2010, 02:49 PM
I am in need for a IC fan for the shotout. Let me know

Macros
09-30-2010, 03:50 PM
Free Shootout Delivery
--------------------------------------------------------------------------------

- 2 early model ABS units from the 91 SC's I parted out. One has a leak at the block (great for core or rebuild), and one was pulled working last month. Willing to sell both for $180.

- White Front and Rear Bumpers from a 91 SC. Great shape! No broken clips. Some black spray paint on corner of front. $200 for both.

- 2 91 Superchargers with Intake Plenums and Throttle Bodies. Great shape, everything spins freely. Rotors are in great shape as well. $200 Each.

- Set of Original Front Corner Lights (Clear). Like New! $20.

- Early Model Black Cluster Surround (No Delay) - $20

- Early Model Black Cluster Surround (Delay Lighting) - $20

- Passenger Side White Ground Effects - $25

- 95 Trunk in Opal Frost with Lighted Factory Spoiler, Lights from an LX, and lock. Perfect Shape, but sanding where Dealership logo was. $140.