PDA

View Full Version : Performance & Stock Parts For Sale



DrFishbone
09-17-2010, 12:58 AM
FREE DELIVERY for parts delivered to shootout!!! :D Otherwise, prices are plus shipping.

Black Leather Door panels w/inserts - $100

Black Leather Door panel inserts and rear speaker covers - $75

94/95 SC Rear Taillight Set - $80

Early Model supercharger - Needs snout rebuilt, rotors & case in great shape - $90

Early model Stainless center caps (some slightly-more-than-light scratches) - $20

Mark VIII 80mm MAFS w/electronics - $50

Complete set of GFX (side skirts) red or white: $75

3.27 TL rear end (painted black) - $150

Red interior pieces (see post for details): Red Interior Parts Listing (http://sccoa.com/forums/showthread.php?t=114901)

3.73-geared rebuilt rear-end - supposed to be low miles on rebuild. I have the receipt from the shop the previous owner used. - $350

Factory-looking T-Bird spoiler (off a base T-Bird, needs paint) - $40

93 black dashboard - good shape overall, has two small places where the vinyl was "patched" that don't look too awesome (near sliding storage area on early model dashes). No cracks/sun damage. w/wiring, etc. : $100 w/o wiring etc: $80 (PM for delivery, details, and/or pictures installed)

K&N Panel filter - $20 as is or $30 cleaned & oiled

42# injectors - $125

Any single turn signal (front or rear) - $15 (or only $10 at Shootout:D)


Can also possible get the following...these parts are still on junkyard cars. I'll get you the best condition possible out of about 4-6 Mark VIII's.

Mark 8 Rear end: $150 (w/stock gears) or $135 (w/o stock gears)
Mark VIII Rear Lower control arms w/bolts: $100 (pr)
Mark VIII one-piece driveshaft: $75

I also have many 89-93 SC stock parts (including blue, black, red interior pieces) - let me know if you need something in addition to the above and I might throw it in for free.

Any large or heavy parts need to be paid for before the shootout.

**SOLD STUFF**

SOLD (@ Shootout) Clear Corners - $35

SOLD (@ Shootout) Tokico Illumina II (front and rear) shock set - The rears look really nice, the front have some surface rust, but all pass the push/pull test for stiffness and smoothness...mileage unknown. They were on a parts car I bought a few years back. - $175

SOLD (@ Shootout) Eibach lowering springs (full set) - one of the front ones had the bottom 2/3 of a coil break off, but they should be usable if the other side is cut to the same length. Bottom coils on fronts are rusty and should be repainted, but rear are in nice shape. - $75 (all 4 springs)

SOLD (@ Shootout) MN12 Performance Polyurethane Front Suspension Kit (minus Ford Strut Rod Bushings) (New - never installed.) $150

SOLD: Mid-length headers (Kooks?) w/O2 sensors - Need some minor repairs, re-painted, but overall good usable shape - $150

SOLD (@ Shootout) Eibach Lowering springs (Rear only) - $50

SOLD RARE WHITE Leather Door panel inserts and rear speaker covers - $100

Flex
09-17-2010, 02:44 AM
Pics of the headers and control arms please. Thanks.

95_XR7
09-17-2010, 05:12 AM
Dang...I need to find someone who would bring the headers back to Illinois with them. =D

In reality, I'll let you know about those headers by the middle of next week if they don't sell by then.

-Corey

DrFishbone
09-17-2010, 08:23 AM
Pics of the headers and control arms please. Thanks.

Controls arms are in the junk yard, I would have to go get them. What do you need to see on them? :confused: I have about 8 Mark VIII's to choose from right now. :cool:

DrFishbone
09-17-2010, 08:32 AM
Headers - pictures show the EGR hole that needs filled or a new tube welded on and the dent in the collector flange thing. There are two other very minor dents in the primaries - if you want to see pictures, let me know.

DrFishbone
09-17-2010, 09:09 AM
Pictures of Eibach springs, the only two bad spots in the dash (the rest is near perfect), MN12 poly kit (what you see if what you get), set of #42 injectors, Mark VIII MAFS.

DrFishbone
09-17-2010, 09:13 AM
Late model taillights, K&N panel filter, clear corners, misc stock corner lights, 89-91 taillights, etc.

Regul8r
09-17-2010, 09:15 AM
Headers - pictures show the EGR hole that needs filled or a new tube welded on and the dent in the collector flange thing. There are two other very minor dents in the primaries - if you want to see pictures, let me know.

Replied to your PM on the headers before I saw you posted pics.

Will let you know this evening/tomorrow whether I can get them or not.

DrFishbone
09-17-2010, 09:23 AM
Black leather speaker covers (93 - w/o SS trim) - real good shape
Black leather speaker covers (89 - w/SS trim) - real good shape except the fabric "square" need re-attached on both
White leather speaker covers - real good shape
White cast plastic door cups - small chip out of driver's side, missing one bottom tab (the door panel inserts are in the loft...if you're interested, I'll get them out and take pictures)
Red cloth speaker covers (89 - w/SS trim)

I think the white speaker covers, door cups, and door panel inserts would look pretty cool in a black interior car...they came in gray interiors from what I've seen. If interested, I can pop them into my door panels and take some pics. :cool: Just better hope I don't change my mind on them! :rolleyes:

DrFishbone
09-17-2010, 09:24 AM
Replied to your PM on the headers before I saw you posted pics.

Will let you know this evening/tomorrow whether I can get them or not.

Cool man - sorry again for not getting you the pictures! I had them all ready and thought I sent them...but apparently not! :o

DrFishbone
09-17-2010, 09:58 AM
Added some more parts...

Also, for the headers, I have downtubes w/hi-flow cats - see above. This should help alot when adding to or fabbing up your exhaust. They are in similiar condition as the headers if I remember right.

Regul8r
09-17-2010, 10:09 AM
Added some more parts...

Also, for the headers, I have downtubes w/hi-flow cats - see above. This should help alot when adding to or fabbing up your exhaust. They are in similiar condition as the headers if I remember right.

OK, well THAT might save me the money of fabbing up the rest of this exhaust!
Pics of those and what they are? Size? What Cats?

We'll talk price through PM.

DrFishbone
09-17-2010, 11:04 AM
I will have to check they are at my parents place.

I will let you know.

90coug
09-17-2010, 12:17 PM
Late model taillights, K&N panel filter, clear corners, misc stock corner lights, 89-91 taillights, etc.

Hey Bone, do you know if the led's inside the reflector panels are in good shape? I'm in need of the passenger side. Are you only selling this as a set?

Thanks,

-B

DrFishbone
09-17-2010, 12:54 PM
Hey Bone, do you know if the led's inside the reflector panels are in good shape? I'm in need of the passenger side. Are you only selling this as a set?

Thanks,

-B

I can test them. This is a set only, though. I have another set that I will split up though: passenger side only: $35 (assuming all LED's work)

90coug
09-17-2010, 01:01 PM
I can test them. This is a set only, though. I have another set that I will split up though: passenger side only: $35 (assuming all LED's work)

If it checks out okay consider it sold! Is that 35$ shipped, if not how much shipped to 80013? This is for my 95SC... oh, and if it checks out okay could you send pics to this email addy (mailto:[email protected])?

Many thanks,

-B

Regul8r
09-17-2010, 01:18 PM
Added some more parts...

Also, for the headers, I have downtubes w/hi-flow cats - see above. This should help alot when adding to or fabbing up your exhaust. They are in similiar condition as the headers if I remember right.

Money sent for headers and down pipes.

WOOOHOOO!!!!
Now I have to finish porting these 4 sets of manifolds I have, to sell them and recoupe my money!

shoalcracker
09-17-2010, 10:03 PM
PM sent re Clear Corners

Paul

nanatothesixth
09-17-2010, 11:01 PM
pm has been sent!

DrFishbone
09-18-2010, 08:32 AM
All PM's sent. :cool:

Plat0ribs
09-19-2010, 01:40 PM
Any suspension/brake/or bushings...

IE: I'll take the poly set please... can pick up at shootout or we can get together earlier somewhere in between.

I need to redo everything underneath a 89 5-speed.

DrFishbone
09-19-2010, 03:23 PM
Any suspension/brake/or bushings...

IE: I'll take the poly set please... can pick up at shootout or we can get together earlier somewhere in between.

I need to redo everything underneath a 89 5-speed.

PM sent brotha....

Plat0ribs
09-19-2010, 04:12 PM
Right on, check your PM's

DrFishbone
09-20-2010, 11:36 AM
Parts Added!!! TTT

DrFishbone
09-21-2010, 12:04 PM
Plat0ribs - thanks!

List is up-to-date!

Time is ticking!

Large parts will probably not be available for another year!

90coug
09-26-2010, 09:26 PM
PM sent....

DrFishbone
09-27-2010, 09:05 AM
TTT....prices dropped!

If you want MarkVIII arms or rear, gotta let me know by today. :)

DrFishbone
09-27-2010, 09:13 AM
Oh yeah...one other thing - if anyone needs these things shipped, I will not be making any additional trips to UPS/USPS unitl after the Shootout.

If anyone will be at the shootout and wants to check out anything before committing to buy, I can probably bring the parts of interest up for you. :) Just let me know.

DrFishbone
10-01-2010, 03:27 AM
Last call! :D

DrFishbone
10-12-2010, 10:49 AM
Shootout is over :(

So, if anyone is interested, last chance at these prices till next year! :D

Wardboy
10-12-2010, 11:55 AM
Shootout is over :(

So, if anyone is interested, last chance at these prices till next year! :D

Matt,
How much for the white interior pieces shipped to 18214? Definately want them...just need a total,
Dave

DrFishbone
10-12-2010, 12:33 PM
Matt,
How much for the white interior pieces shipped to 18214? Definately want them...just need a total,
Dave

PM sent...

DrFishbone
10-21-2010, 02:57 PM
TTT...

I may hang on to the red stuff till next spring. Next time I feel like cleaning out the shed though...they're gone. :(

Silver R
10-21-2010, 04:14 PM
You Have PM..

DrFishbone
10-22-2010, 06:42 AM
PM replied!

Somebody should just bring a truck and visit my "SC Flea Market" :cool:

DrFishbone
10-27-2010, 12:49 PM
ttt....listing updated!