PDA

View Full Version : Finally found a blue pony



Roadhawg
10-31-2010, 09:35 PM
My daughter finally found a blue SN95 Mustang. She ended up buying a 1998 V6 Mustang with a 4R70W auto.

nickleman60
10-31-2010, 10:12 PM
Looks real nice.......too nice to tear apart.......:rolleyes:

Roadhawg
11-01-2010, 11:19 AM
Looks real nice.......too nice to tear apart.......:rolleyes:

I will be leave it alone for now. With the exceptions of a few mods; like lowering springs, upgraded rims/tires and new Struts/shocks.
I will most likely spend this winter building a SC engine to drop into the car in the spring.

frdlvr30
11-01-2010, 07:51 PM
Wow, thats a pretty nice one. Nicer than yours was when you got it, No?

BLOWN38
11-01-2010, 09:45 PM
Cool man! Looks good.

mcate
11-01-2010, 10:14 PM
Nice find! Could use a good detail though........:D

Roadhawg
11-12-2010, 07:59 AM
This week we removed the Pony strips, installed Eibach Pro springs, Tokico Shocks and Struts. The Mustang also now has sequential tail lights.

Roadhawg
12-07-2010, 07:37 PM
I had some 2003 SVT Cobra rims, which we put on the Mustang. The tires needed replacement, so there was a final farewell to the Goodyear Eagle F1 radials. Then we took the car to get some new Nitto Nt555s.

http://www.youtube.com/watch?v=vyX0QIh_z60

BLOWN38
12-07-2010, 09:46 PM
I don't remember my 94 burning the tires that well. Thats not to shabby.:cool: What gears does this car have? Mine had 2.73's. I got 30mpg going to FL once in it tho.

Roadhawg
12-08-2010, 08:46 AM
The car has the stock 7.5 with 2.73 gears.
An 8.8 rearend with a Tloc and 3.55 gears, is in the car's future.

frdlvr30
12-08-2010, 07:11 PM
The car has the stock 7.5 with 2.73 gears.
An 8.8 rearend with a Tloc and 3.55 gears, is in the car's future.

Speaking of which....Im not working weekends anymore. So, get you shizit together and OB1 will teach you how to set the 8.8 up properly. In your warm garage....of course. Saturdays are best for me....

Roadhawg
12-09-2010, 06:40 PM
Speaking of which....Im not working weekends anymore. So, get you shizit together and OB1 will teach you how to set the 8.8 up properly. In your warm garage....of course. Saturdays are best for me....

I need to order a master rebuild kit.
If we need to replace the pinion shims, how do we press the bearing off?

frdlvr30
12-10-2010, 05:20 PM
I need to order a master rebuild kit.
If we need to replace the pinion shims, how do we press the bearing off?

We go find a press....

Roadhawg
12-29-2010, 08:54 PM
Here is an updated picture........
It now has 03 Cobra rims with Nitto 555s and some smoked Cobra headlights.