Suspension question

RapidRobert

Registered User
Hey guys--a new guy here.
I've had a 95 SC for about 4 years now and have noticed that the bushings are gone from the rear end links. I did a search on replacing them and everyone says that they can be done with the wheels under load (either on the ground or on ramps). When I try to move 'em with my hand, it seems like a lot of tension on them. If I put the jack under the control arm and raise it a couple of inches, it seems to take the tension off some. The bolt is more centered in the eye of the link. Which way is the best? I don't want to break/bend the link and want to be safe.
Thanks for any help.
 
if the bar ends (not the links) are parallel with the ground then just loosen the end link nuts and all will be happy
 
Back
Top