cams for SC [very technical] YOUR INPUT NEEDED

RGR

Registered User
I am seeking cam specs for SC modded combos.
Do not bother to list your specs unless you have LCA's also.
I would like additional info such as ramp rates if available,
and details such as asymmetrical lobe profiles if you know it.
My cam speccing experience consists mainly of centrifugal SC's
but I did do a few successful roots cams for SC folks. Trying
to get a feel for the "current trends" in blower camming, as
I will soon be doing a cam for the "Ultimate? SC Build" that
my son is building, based on an SC block with all the latest
build technologies and such.
TIA
RGR

My first SC (centrifugal) cam was the 215/225 @ 110* LCA
that was emissions legal in CA (Los Angeles) {passed the sniffer}
and ultimately made nearly 400whp with an ATI setup in a Mustang.
This was with stock valve heads in a .030" over 4.2 with custom
Upper Intake. This cam was a mainstay for RPM Mustangs for 10 years.
I usually added 2* to the LCA for a roots SC or just specced out
another cam. The lobes had slightly more aggressive ramps than
stock, similar to an E-303 Ford 5.0 cam. HIT is at 60 for the E-303.
(280* adv. duration and 220* @ .050)
 
well dag on your bein pretty picky but heres what i got


218/224 .520 lift 114*lsa

10% late model with heads injectors and spray
 
Back
Top