Is it hard to get the rear deck (package tray) carpet out?

phils89sc

Registered User
You know what I am talking about. Where the third brake light is, is it hard to swap that 'carpet' out? I am going to swap mine out (bad shape) for one I found in my local u-pull-it. Is it hard to get out.

Thanks...Phil
 
You will have to use a large Torx bit to remove both of the rear seat belts....

You will also have to remove at least one of the rear side panels (maybe both), as well.....

Use a small stubby phillips head screw driver to remove the screw that holds the third brake light assembly....
 
Yeps, tools etc. as BigE stated....practice on the junker to know if it's something you'll want to do twice :)
 
You also have to remove the rear seat.
You have to remove the bottom of the rear seat to get the top half out.
There are plastic push pins holding the rear deck carpet in place where it goes under the top portion of the seat.
 
Back
Top