PDA

View Full Version : 80 lb Siemens Injectors $255 shipped



BirdofPrey97
04-04-2011, 08:32 AM
Looking at trying a group buy again. How many do we have interested in 60s and who in 80s? Siemens EV1 standard length/size

Be 250 for 60s lower 48

Be 255 for 80s lower 48

Depending on how many we buy is what makes the price. That is for the first 36 bought. We get more than 6 people that PAY that size will get cheaper.

If we do not get 6 people for each kind that size will not be purchased.

Have to get people with the $ by 5-1-11. If you do not have the $ or not sure if you will have the $ by that date please do not post until you do to help keep the thread clean. If you have questions Please PM me or email birdofprey97 at gmail dot com

I have done this GB twice with success. The last time it was tried it did not occur due to lack of interest, so if you want them and have at least the amount of $ available as listed above let me know and we will get this moving forward.


5/5/11
60s
1. Davec73
2. SuperChicken89
3.
4.
5.
6.

80s
1. MyWhite89 P
2. 90blkbrd P
3. 92bird P
4. Black89XR7 P
5. Macius8 P
6. sics6 P
7. 89XR7TDP
8. forcedbird94?
9. GTPsite, selliot P
10. Supercharged95 P
11. Clubgpsite, bluegpgtp P
12. StilwellSC P
13. nliberto P
14. BKB P
15. shoalcracker P

As of 4/29/11 we do not have enough to do the 60lb. We do have enough to do the 80lbs at 255.00 a pair.
There are no additional parts required to go from 60s to 80s. Both require a tune and the 80s can be tuned to do the work of the 60s.

mywhite89
04-04-2011, 09:00 AM
I will definitely be in for a set of 80's though I'm not sure yet if I will need short ones or regular length. That I need to figure out.

Chris

BirdofPrey97
04-04-2011, 09:17 AM
I have not checked into any shorties yet. Time has not allowed me too, but if there is a demand it can be looked into it. If it's just 1 or 2 sets odds are that a discount is going to be hard for me to come by.

90blkbrd
04-04-2011, 09:40 AM
Chris I am 99% certain you want regular ones.

Put me down for a set of 80's.

92bird
04-04-2011, 02:20 PM
Put me down for a set of 60's.. Ironically they are for my GTP, which uses the same type/style injectors..

This is a good price.

Jeramie

BirdofPrey97
04-04-2011, 02:22 PM
Put me down for a set of 60's.. Ironically they are for my GTP, which uses the same type/style injectors..

This is a good price.

Jeramie

Yes, it does, but I cannot get the guys on the www.clubgp.com or www.grandprixforums.net to go in on a group buy. I own a GP as well.

BLOWN38
04-04-2011, 03:04 PM
What about even bigger injectors? I'm thinking 100+. My 80's are maxed now and I would like to run e85 at some point. How big High impedence can he get?

92bird
04-04-2011, 04:01 PM
Yes, it does, but I cannot get the guys on the www.clubgp.com or www.grandprixforums.net to go in on a group buy. I own a GP as well.

Cool, i'll ask some local SC and clubGP guys I know. 60's are perfect for what my GTP needs, and should still be enough to feed it if I decide to change boost sources (read: turbo :cool: )

Jeramie

BirdofPrey97
04-04-2011, 04:21 PM
I can get the larger sizes, but again the count would have to be at least 6 sets before any real discount is available. The largest I have bought are 220s that went into a 572 twin turbo.

If you know what you want let me know and I can get you some pricing, but plelase keep that to email or PM.

I am Greyghost over on clubGP.

Black89XR7
04-06-2011, 03:04 PM
Put me down for a set of 80's:D

Travis Hammerling

BirdofPrey97
04-06-2011, 03:41 PM
So, we are half way to our need on 80s. :)

92bird
04-08-2011, 01:51 PM
Put me down for a set of 60's.. Ironically they are for my GTP, which uses the same type/style injectors..

This is a good price.

Jeramie

Cancel that, put me down for a set of 80's instead. I'm going to need them if I want to try E-85.

So that puts us at 4 out of 6 sets required for 80 lb/hr. :cool:

I'm solid on this, got the cash ready to go.

Jeramie

macius8
04-08-2011, 01:58 PM
Put me down for a set of 80's as well

mywhite89
04-08-2011, 02:08 PM
regular longer length 80's for me. I got the $$$

Chris Homan

davec73
04-08-2011, 06:21 PM
Yes, it does, but I cannot get the guys on the www.clubgp.com or www.grandprixforums.net to go in on a group buy. I own a GP as well.

LOL I am on Grand prix forum as well thunder71173 I have a gtx converted GTP as well didnt know the injectors were the same! put me down for a set of 60's

StilwellSC
04-15-2011, 08:31 AM
Put me down for a set of 60's.

SuperChicken89
04-15-2011, 12:29 PM
Put me down for a set of 60's also.

89XR7TD
04-18-2011, 07:08 PM
I will be in for a set of 60's also!

Tom

BirdofPrey97
04-20-2011, 10:36 AM
Updated first post with current information needed. Seems we need one more for the 80s and a couple more for the 60s at this point. Getting close as long as everyone has the $ available it looks like the 80s should at least go through.

kenewagner
04-20-2011, 10:51 AM
What about even bigger injectors? I'm thinking 100+. My 80's are maxed now and I would like to run e85 at some point. How big High impedence can he get?

How much HP are you putting down?? I didnt think you were over 450 and your 80s are almost maxed?

Ken

BirdofPrey97
04-20-2011, 11:43 AM
Guys if we all switch to 80s only. I can get them for everyone, which would be 72 total injectors for $265 shipped to the lower 48.

Would you guys that wanted the 60s be interested in going to the 80s for $15 more?

90blkbrd
04-20-2011, 11:46 AM
I don't know much about the GTP's but 60's in a SC require a tune and so do 80's. So why not just get 80's?

neverfastenough
04-20-2011, 11:47 AM
im interested in over 80, also.

BirdofPrey97
04-20-2011, 11:47 AM
I don't know much about the GTP's but 60's in a SC require a tune and so do 80's. So why not just get 80's?

Both require a tune for the GTPs as well.

BirdofPrey97
04-20-2011, 11:49 AM
im interested in over 80, also.

I have only received 1 request for over 80s, but no size to get pricing on, so it has not been pursued. If there interest is there I can do the asking, but I need more information and at this point that information would be best to exchange in PMs or emails to help keep this thread on subject and as clean as possible.

mywhite89
04-20-2011, 06:10 PM
"Sales pitch of the Day!!!" Why don't you 60 Lb people just jump up to 80's? couple $$ more and you wont have to change injectors again unless you get into something very radical. I have 60lb injectors now just because that was the biggest I could buy when I did! I can't believe I grew out of them, that is what I tried to avoid when I bought injectors. Whether your buying 60's or 80's you have to get the car re-tuned, the whole 9 yards anyways. Drivability wont be affected any worse which ever option you decide on. You will refer back to my post in 3 years or less and want to smack yourself if you don't take my advise, thats my opinion seriously!:D

Chris

edit: crap, I just saw the posts above asking the same thing, at least we're on the same page!

89XR7TD
04-20-2011, 09:08 PM
The injectors only spray as much gas as needed right, with the correct tune that is....correct? I still have a stock bottom end, only changes going to be in the near future is cam n heads with MPX stuff...

Just wondering ya know:D

Tom

BLOWN38
04-20-2011, 09:41 PM
Ken, I pulled 438 on the dyno. In Nov when I was running 10's at 24psi my DC was hitting 105%. I'm over 80% from 5 to 6500rpm.

BirdofPrey, I haven't got back to you cause I'm not sure what I want to get yet. I'm trying to get my dad to get some 80's though.

mywhite89
04-21-2011, 08:48 AM
The injectors only spray as much gas as needed right, with the correct tune that is....correct? I still have a stock bottom end, only changes going to be in the near future is cam n heads with MPX stuff...

Just wondering ya know:D

Tom

Tom, wont hurt a thing to run 80's rather than 60's. Just give you more room to grow without upgrading injectors again.

chris

BirdofPrey97
04-21-2011, 08:53 AM
Debating if I should change the first post to just 80s and $265 shipped to your door.?.?.?

Asked Dalke if I need to change my tube in the C&L to go from 60s to 80s and he said the same tube can be used, but as Mike said a tune for either injector is required.

Trying to post over on another board if they will let me, but I haven't heard back from their admin yet.

mywhite89
04-21-2011, 09:24 AM
Ken, I pulled 438 on the dyno. In Nov when I was running 10's at 24psi my DC was hitting 105%. I'm over 80% from 5 to 6500rpm.

BirdofPrey, I haven't got back to you cause I'm not sure what I want to get yet. I'm trying to get my dad to get some 80's though.

Is your fuel pressure keeping up? I'm surprised you are maxing them out unless your fuel pressure is suffering that would explain it.

BirdofPrey97
04-21-2011, 10:08 AM
BirdofPrey, I haven't got back to you cause I'm not sure what I want to get yet. I'm trying to get my dad to get some 80's though.

No offense was meant in the comment about not hearing a size, just wanted to state that others not just you had mentioned larger injectors, but nobody has said what size specifically. I did get a guy a set of 120s. :eek:

BLOWN38
04-21-2011, 10:32 AM
No offense was meant in the comment about not hearing a size, just wanted to state that others not just you had mentioned larger injectors, but nobody has said what size specifically. I did get a guy a set of 120s. :eek:

Took no offense.:)

I meant to add that I run a base pressure of 40psi. And the peak is 60 and does not fall of but I guess should be 64 at 24#s of boost. The pump may not be keeping up or the internal pressure valve has weekened. Its an older pump and I have a boost a pump on it feeding it 14 volts. Either way they are prolly still at 80% duty. It is a 255HP pump.

BirdofPrey97
04-21-2011, 10:37 AM
Took no offense.:)

I meant to add that I run a base pressure of 40psi. And the peak is 60 and does not fall of but I guess should be 64 at 24#s of boost. The pump may not be keeping up or the internal pressure valve has weekened. Its an older pump and I have a boost a pump on it feeding it 14 volts. Either way they are prolly still at 80% duty. It is a 255HP pump.

We need to find a good aftermarket fuel lines to put on our cars that are a tad larger IMO.

David Neibert
04-21-2011, 04:58 PM
Took no offense.:)

I meant to add that I run a base pressure of 40psi. And the peak is 60 and does not fall of but I guess should be 64 at 24#s of boost. The pump may not be keeping up or the internal pressure valve has weekened. Its an older pump and I have a boost a pump on it feeding it 14 volts. Either way they are prolly still at 80% duty. It is a 255HP pump.

Chris,

Are you still using the stock supply line ?

David

BLOWN38
04-21-2011, 05:49 PM
Chris,

Are you still using the stock supply line ?

David

Yeah.........:o

kenewagner
04-21-2011, 08:00 PM
Yeah.........:o

Put on a 1/2" feed line and with your driving skills you would probably run 9s:rolleyes::D:D

Ken

sics6
04-21-2011, 09:35 PM
Hey guys im new here, but i will purchase some 80lb injectors. I can have the money by 5-1-11 so you can count me in.

BirdofPrey97
04-22-2011, 08:15 AM
I have worked with the vendor some more and he has agreed to go to $255 for a set of 80lb injectors, but we need 6 more people for that price to happen.

Without those 6 people the price will remain at the $275.

sics6
04-23-2011, 03:31 PM
So who do i paypal the money to on the first of the month for the injectors?

BirdofPrey97
04-23-2011, 09:15 PM
So who do i paypal the money to on the first of the month for the injectors?

The $ will come to me, but trying to see where the guys wanting the 60s are want to do. They dont have enough to make the GB, so I was hoping they would want the 80s so the price would go from 275 a set to 255, but I havent heard from any of them, so at this point it looks like 6 sets of 80s will be bought for 275 a set.

macius8
04-23-2011, 09:26 PM
so we need 12 total to make the 255 price?

89XR7TD
04-23-2011, 09:31 PM
Just debating is all....

Tom

BirdofPrey97
04-23-2011, 09:31 PM
so we need 12 total to make the 255 price?

Yes. We need to sell 12 total sets or 72 total injectors. I think we actually have 7 sets of 80s sold right now.

BirdofPrey97
04-23-2011, 09:32 PM
Just debating is all....

Tom

Tom,

That's fine. If we had enough guys that wanted 60s that would make it easy as well, but we dont.

BirdofPrey97
04-25-2011, 09:01 AM
Updated the first post and sent out some PMs. If we dont get the 12 I will see what we can do with the price since we do have more than 6.

A couple have asked about how to make the payment. The $ will be sent to me via paypal. If you want to send it as a gift that is fine or if you prefer the other method please add 3% to the total.

If the 1st does not work for you on getting the payment out please send me a PM and we can discuss.

mywhite89
04-25-2011, 08:05 PM
Updated the first post and sent out some PMs. If we dont get the 12 I will see what we can do with the price since we do have more than 6.

A couple have asked about how to make the payment. The $ will be sent to me via paypal. If you want to send it as a gift that is fine or if you prefer the other method please add 3% to the total.

If the 1st does not work for you on getting the payment out please send me a PM and we can discuss.

Whats your paypal address?

I'll be sending out payment as soon as we shut the gp down or get 12 buyers!

Chris

BirdofPrey97
04-26-2011, 08:11 AM
Whats your paypal address?

Let me get a price locked in and then I will post the paypal account.

sccrewzer
04-26-2011, 01:20 PM
I looking to get 60s but 80s will do but don't have cash for it now if someone here can afford an extra set i'll be able to come up with the money in like 2month tops let me know if you can spot me.:D

BirdofPrey97
04-28-2011, 09:26 AM
Updated the list. 2 more people and the 255 is a done deal.

BirdofPrey97
04-28-2011, 02:17 PM
1 more person needed to get the 255 price shipped to your door.

nliberto@powder
04-28-2011, 05:41 PM
My 89 SC has the 75 mm TB, MP raised top, 3" MP fresh air tube/filter, 75 mm air sensor housing, headers & 3" exhaust, 10% OD blower pulley, SCT chip with Dalke tune.

Dave Dalke, says I am probably too lean now that the motor can breathe, even though he increased the fuel as high as he can with tuning and stock injectors. My motor is stock, other than the above mentioned "bolt-ons".

So my question is: What else do I need to change, beside the SCT tune, to use these 80# injectors? Fuel pump? Fuel regulator? Fuel rail? Fuel line? Fuel filter? :confused:

If additional work isn't too bad, I will be your 12th purchaser! :D

BLOWN38
04-28-2011, 09:59 PM
My 89 SC has the 75 mm TB, MP raised top, 3" MP fresh air tube/filter, 75 mm air sensor housing, headers & 3" exhaust, 10% OD blower pulley, SCT chip with Dalke tune.

Dave Dalke, says I am probably too lean now that the motor can breathe, even though he increased the fuel as high as he can with tuning and stock injectors. My motor is stock, other than the above mentioned "bolt-ons".

So my question is: What else do I need to change, beside the SCT tune, to use these 80# injectors? Fuel pump? Fuel regulator? Fuel rail? Fuel line? Fuel filter? :confused:

If additional work isn't too bad, I will be your 12th purchaser! :D

You don't have to change anything but the tune. But it wouldn't be a bad idea to upgrade the pump.;)

BirdofPrey97
04-28-2011, 10:40 PM
Alright, we have enough for the 80s now.

Paypal : tlundvall at gmail dot com

Include your screen name in the payment and the injectors will be shipped to the verified address from your paypal account.

If you do it as personal there is no additional charge. If you use paypal as a standard payment 3% will need to be added. $262.65.

Once payment is received the order will be made. Whatever amount I have by the 5th is when the order will be made. If you do not have your payment to me by then you will not be getting a set.

nliberto@powder
04-29-2011, 10:53 AM
You don't have to change anything but the tune. But it wouldn't be a bad idea to upgrade the pump.;)

Ok, I am in! PayPal to be sent.:)

Any ideas, where to buy a fuel pump? I see Evanhoff has a complete 255 kit, but are there any other choices?

BirdofPrey97
04-29-2011, 11:05 AM
Ok, I am in! PayPal to be sent.:)

Any ideas, where to buy a fuel pump? I see Evanhoff has a complete 255 kit, but are there any other choices?

I went to the mustang forums and got one from there. Had to get the right sock to put on it, but it was the same pump.

92bird
04-29-2011, 11:34 AM
Payment sent for the 80's :D

Jeramie

BirdofPrey97
04-29-2011, 11:37 AM
Sorry guys I will put in the post above as well, but please include your screen name in the paypal payment, so I can track it easier.

nliberto@powder
04-29-2011, 11:46 AM
Todd:

PayPal payment sent with shipping address. Please provide delivery tracking info. (if available) and shipment date.

Thanks,

Nick

BirdofPrey97
04-29-2011, 11:47 AM
Todd:

PayPal payment sent with shipping address. Please provide delivery tracking info. (if available) and shipment date.

Thanks,

Nick

Will do Nick. Items will be sent via USPS insured with a delivery confirmation. A USPS box will be used.

sics6
04-29-2011, 04:49 PM
Okay man paypal sent

BKB
04-30-2011, 03:18 PM
Paypal sent for the 80s

macius8
04-30-2011, 03:34 PM
payment sent as well
did paypal change their fee rules? Looks like all transactions including personal require the 2.9% + .30$ fee

BirdofPrey97
05-02-2011, 09:02 AM
payment sent as well
did paypal change their fee rules? Looks like all transactions including personal require the 2.9% + .30$ fee

If they did I was unware of it.


Busy cleaning up the threads and responding to emails and PMs. Hope to have the list updated by noon today.

Couldn't get 13 people interested, but now that it is going to happen I have 30 people asking about them.:rolleyes:

Black89XR7
05-02-2011, 04:57 PM
Payment sent for the 80 pound injectors:D

Travis Hammerling

mywhite89
05-02-2011, 05:34 PM
Payment sent. Thanks for the pm Todd. I havent followed this thread for about a week, didn't realize it had finally matured!! 80Lb injectors for me btw.

Chris

BirdofPrey97
05-03-2011, 09:04 AM
Chris & Travis I have your payments.

Waiting to hear from one on his date and the other too are supposed to pay tomorrow. With that in mind the sets will be ordered on the 5th for those that have paid.

For the guys wanting the 60s I am still working on a deal for those injectors, but nothing has been firmed up at this point.

92bird
05-03-2011, 06:30 PM
Let me know what you work out for the 60's. I might take a set of those too for yet another project I have, if it will help the buy.

Jeramie

89XR7TD
05-03-2011, 09:14 PM
Will be sent to ya on the 4th"Thursday" as planned.... Thanks

Tom

BirdofPrey97
05-04-2011, 08:58 AM
Hello all!

We have come across an issue and I want to be up front with you all about it. The vendor had a large order go out and is not sure if they can meet our quota of 72 injectors this month. They will be able to complete the order by 6/20.

They are supposed to get back with me today if they can meet the numbers or not, but I want to check on a couple things.

1. I have contacted other vendors too see if they are willing to meet the price we were offered. If that occurs there will be no issue and the order will be made tomorrow.

2. Do we just want to wait until 6/20 for them to be shipped to me and then once recieved I will ship them out, so more than likely they will not be in your hands with this option until 7/1 or there abouts.

I dont know how soon these are needed by everyone. Several guys I know can wait, but that's not everyone, so I am asking now before any ordering occurs. Sorry, but this information was emailed to me last night.

No matter what, the injectors will be ordered and you will NOT have to pay anymore it's just that the timeline MAY have changed.

I need input from the people that have paid on this.

Once I hear back from the other 2 vendors I asked about meeting the price that information will be posted as well.

mywhite89
05-04-2011, 09:40 AM
If another vender can make it happen great, I don't think I will suffer either way though. Thanks for the heads-up.

Chris

BirdofPrey97
05-04-2011, 11:25 AM
I got it cleared up with another vendor that I have used in the past. The order may be a day or two later in arrival, but not a month. Plan is still to order tomorrow.

I am updating the 1st post as people pay currently we have 10 people that have paid and 3 have told me they are sending $ today. Provided they come through we are good to order tomorrow.

BirdofPrey97
05-04-2011, 08:32 PM
We have 12 payments, so they will be purchased tomorrow as planned. I will update this thread when they ship to me and when they arrive and let each of you know as they are shipped out from me to you.

The guys in red on the first post are the ones that have not paid by the dead line. That means you are out on the order if payment is not received before ordering tomorrow.

89XR7TD
05-04-2011, 09:02 PM
I'll be sending the funds around 7am to tlundvall@gmail.com

Tom

BirdofPrey97
05-05-2011, 01:59 PM
Awaiting the invoice so that it can be paid. 14 sets are being ordered.

BirdofPrey97
05-06-2011, 03:32 PM
Update. Awaiting the paypal invoice from the vendor. Looks like the injectors should arrive by the end of next week, so the following Monday things should be shipped out. Which would be the 16th.

victor malvar
05-08-2011, 11:54 AM
Hi Todd is it to late to jump in on the 60's???

Thanks Victor

BirdofPrey97
05-09-2011, 09:19 AM
Victor,

I have not moved forward with the 60s, because we are 4 sets short of making that price. If you are interested in 4 sets let me know. Or at least 3.

BirdofPrey97
05-09-2011, 11:10 AM
Update: 5/9/11

Just got off the phone with the vendor and 36 injectors should be able to be shipped this week, but the others will be about 2 weeks out.

Again,

If you need them yesterday please let me know. I have 6 sets that should be here this week to get out. The others are awaiting Siemens production run. Seems the 80s are very popular for the E85 needs of several cars. Tons of EV6 connections out there, but the EV1s are behind on production.

I have several of you that have no problem waiting the 2 weeks for production, but some need them for racing coming up this month. Those 2 are at the top of the list.

BKB
05-09-2011, 06:49 PM
Just confirming I'm one of the two that need them ASAP.

BirdofPrey97
05-11-2011, 03:12 PM
Just confirming I'm one of the two that need them ASAP.

You will get your parts when you pay the FULL amount sent to you via PM. The prices listed on the front page state for the lower 48 states shipped price.

BirdofPrey97
05-12-2011, 09:22 PM
Looks like the first 6 sets will be here Saturday, so I should be able to get them mailed out Monday or Tuesday at the latest.

BKB is you need the set sent out I need to get the amount sent to you via PM. If that amount doesn't work for you please let me know and they will go to the next person.

Since I haven't heard anyone say the "needed" them they will be shipped out in the order on the list excluding the few that have said they could wait.

BKB
05-12-2011, 10:21 PM
I have not received any PM or e-mail from you about a different payment.

BirdofPrey97
05-12-2011, 10:56 PM
I have not received any PM or e-mail from you about a different payment.

BKB I am SO SORRY. I was thinking you were in Puerto Rico. You are good to go they will be sent out. You do NOT need to do anything else. I had the information on a notepad and wrote it down incorrectly. :o

BirdofPrey97
05-12-2011, 11:21 PM
I only have 7 addresses to send to out of everyone. I dont know what Paypal changed, but I can not print a shipping label for everyone.

89XR7
Stillwellsc
Jeramie S.
Douglas M.
mywhite89
black89xr7
Nick@powder

Are the only addresses I have at this time.

Mike and John I can meet up with.

Everyone else needs to send me your shipping address please.

macius8
05-13-2011, 02:38 PM
I only have 7 addresses to send to out of everyone. I dont know what Paypal changed, but I can not print a shipping label for everyone.

89XR7
Stillwellsc
Jeramie S.
Douglas M.
mywhite89
black89xr7
Nick@powder

Are the only addresses I have at this time.

Mike and John I can meet up with.

Everyone else needs to send me your shipping address please.


Where in Il are you located?

BirdofPrey97
05-17-2011, 10:02 AM
Where in Il are you located?

I am not going to be able to meet up with you. I drive from Des Moines to Champaign twice weekly. You are about 4 hours out of the way.

aikidota2009
05-17-2011, 02:49 PM
Can I still get in on the discounted pricing for the 60's

Thanks,
Scott

sics6
05-18-2011, 09:24 PM
Birdofprey i sent you a couple of pm's but you never replied. Do you have my address now? And when are the 80's shipping? Hopefully sooner than later.

BirdofPrey97
05-19-2011, 02:17 PM
Can I still get in on the discounted pricing for the 60's

Thanks,
Scott

Scott,

The 60s did not come up with a big enough order for any to be sold.

sic6, let me check the orders, but the sets that have been sent, which I just sent 3 sets today and one was delivered to PA today, so that's 4 sets that have shipped.

My schedule this week:

Monday Champaign, IL to Des Moines
Tuesday Des Moines to Burnsville, MN
Wednesday Burnsville to Princton MN to Bloomsburg MN to Glenwood, IA to Omaha, NE.
Thursday Omaha, NE to Des Moines, IA
Friday Des Moines IA to Champaign, IL

Sic6 if yours have not shipped (I will check shortly) I will try to get them to the post office tonight to get out. Worst case will be Saturday. I dont get off of work until 5 and the post office is closed at 6. I should be able to make it this evening.

Sorry for the delay in responses, but I have been busy.

BirdofPrey97
05-19-2011, 02:20 PM
Sic6, I checked and a set has not been shipped to you, so I am in the process of getting them shipped out this afternoon/evening.

sics6
05-20-2011, 04:17 PM
Thanks for the reply. Now my project can continue.

nliberto@powder
05-23-2011, 01:43 PM
Sic6, I checked and a set has not been shipped to you, so I am in the process of getting them shipped out this afternoon/evening.

Do you have any idea when mine will be shipped. Making a plan to install and need to know what's up.:D

BirdofPrey97
05-23-2011, 04:06 PM
Do you have any idea when mine will be shipped. Making a plan to install and need to know what's up.:D

Talked to the vendor at noon today. Siemen has pushed the order back to the 27th for arrival. So, it should ship out to me on Tuesday since Monday is a holiday.

Sorry for the delay guys, but this is out of my hands and the vendors we are awaiting the manufacture.

shoalcracker
05-23-2011, 11:00 PM
Todd

Tks again for all the time invested in making this happen.

Paul

BirdofPrey97
05-24-2011, 08:22 AM
Thanks Paul.

Appreciate the guys that said they could wait and I hope those that have the injectors now are using them. :D

Sorry this is dragging out, but once they are here they will be shipped to the other 8 of you very quickly.

mywhite89
05-24-2011, 09:47 AM
Hey thanks for making this all happen. no hurry for me

Chris

BirdofPrey97
06-01-2011, 10:55 AM
Nothing new to update with. Injectors still have not shipped from Siemens. Working with the vendor to get new date. Sometime next week is what I am being told right now.

BirdofPrey97
06-10-2011, 08:06 AM
Talked with the vendor last night and Siemen gave a new date of Monday.

I am sending out everyone's name and address to the vendor so that the injectors can be shipped directly from the vendor that will save about 7 days on the transportation.

My apologies on this, but I have contacted close to 20 injector vendors and they are saying the samething. That they are awaiting the injectors from Siemen Deka.

If anyone wants a refund they are welcome to it at this point. I can't expect you guys to keep waiting. I still have the $ in my paypal account. The vendor knows he won't get payment until the injectors are available for shipment.

XR7 Dave
06-10-2011, 09:23 AM
My apologies on this, but I have contacted close to 20 injector vendors and they are saying the samething. That they are awaiting the injectors from Siemen Deka.

That's odd. I've not had any issues getting injectors during this time (just received a large order 2 weeks ago). I guess it pays to work with a big vendor. ;) I have injectors in stock but can't match the price, sorry.

BirdofPrey97
06-10-2011, 09:30 AM
That's odd. I've not had any issues getting injectors during this time (just received a large order 2 weeks ago). I guess it pays to work with a big vendor. ;) I have injectors in stock but can't match the price, sorry.

Yes, I was just doing this because a couple guys asked me too. Thought it would help out the community, but has turned into a much longer drawn out situation.

The vendor I am going through has sold injectors to you in the past Dave at least that is what he stated last night. I know this vendor does over 8,000 injectors a month and has any other injector available but this one. I was told about them from my over seas friends that restore American cars and this vendor is here in the states. A quick call to Siemen backed up what has been stated.

All Hail Dave and only parts for your SC can be purchased from him. He has all parts out on time and never holds you up with any plans that have been made. Please bow now. ;):D

IkeyM
06-13-2011, 09:54 PM
Is it to late to get a set of these??

BirdofPrey97
06-14-2011, 11:31 AM
Is it to late to get a set of these?? Yes, since $ is still in my paypal account one more won't bother anything.

Sent an email today awaiting ordering update.

BirdofPrey97
06-14-2011, 11:55 AM
They have shipped and are on the way to the vendor. Getting everyones addresses together that way there is no wait for them to come from me, but can be sent directly from the vendor.

BirdofPrey97
06-14-2011, 12:55 PM
Shipped & Received

89XR7TD
BKB
Macius8
sics6
bluegpgtp
92bird


Shipped:

mywhite89
black89xr7
shoalcracker
stilwellsc
nliberto
selliott
supercharged95
IkeyM

XR7 Dave
06-14-2011, 01:41 PM
Yes, I was just doing this because a couple guys asked me too. Thought it would help out the community, but has turned into a much longer drawn out situation.

All Hail Dave and only parts for your SC can be purchased from him. He has all parts out on time and never holds you up with any plans that have been made. Please bow now. ;):D

Why is it that I can't simply make a statement without it being perceived as some sort of personal attack? I didn't mean anything by what I said other than to point out that not everyone is out of stock. I didn't try to rain on your parade and I am not trying to compete with your group purchase. I have sent several of your participants to you with good will because as I said above, I cannot match your price.

If this is really just an effort to help the club then it should stay that way - as a group buy to help out the club. I'm not sure why you would take my comments personally, particularly if you aren't personally profiting from this (as I assume you are not). If I had thought that this was a "for profit" venture, then I would not have said anything at all.

BirdofPrey97
06-14-2011, 01:57 PM
;)Dave,

I was just giving you a hard time and laughing to myself about the availability, because they are out there, just not at $255 for set of 6 shipped to you. Did the best I could with the sarcasm smiley. :D

Working on getting a GB together for your QHs as we speak. Have 3 of the 5 needed.

BirdofPrey97
06-15-2011, 08:08 AM
The arrival date to the vendor is friday and all the required addresses have been sent to the vendor, so items should be shipped out on Monday.

XR7 Dave
06-15-2011, 02:01 PM
;)Dave,

I was just giving you a hard time and laughing to myself about the availability, because they are out there, just not at $255 for set of 6 shipped to you. Did the best I could with the sarcasm smiley. :D

Working on getting a GB together for your QHs as we speak. Have 3 of the 5 needed.

Ya, I'm not very good at picking up on sarcasm. :rolleyes:

nliberto@powder
06-20-2011, 01:34 PM
;)Dave,

I was just giving you a hard time and laughing to myself about the availability, because they are out there, just not at $255 for set of 6 shipped to you. Did the best I could with the sarcasm smiley. :D

Working on getting a GB together for your QHs as we speak. Have 3 of the 5 needed.

Send the link for the QH group buy, please.

BirdofPrey97
06-21-2011, 06:26 PM
Payment has been made and the injectors are in. They are busy packaging them as we speak and will be mailed USPS tomorrow excluding the CN order it has to be sent UPS due to the strike.

All must be signed for it was the only way I could get the vendor to send them out directly. Sorry for the hassle, so if you are not home you will get a notice in the mail to go to the local Post Office and pick them up.

Appreciate everyones patience and hanging in there. You all are great!

BirdofPrey97
06-22-2011, 08:17 AM
All the injectors have shipped. I am working on getting the tracking info sent out to each person. Should have them within a week at the most provided you live in the US. CN people it is coming via UPS.

BirdofPrey97
06-22-2011, 08:39 AM
Everyone should have a PM (yes, I couldnt dig up all the emails fast enough) with their tracking information. If you don't have tracking information let me know.

Todd

BirdofPrey97
06-29-2011, 11:01 AM
Only had 1 person ask me questions about their order. Everyone else getting what they expected/wanted?

mywhite89
06-29-2011, 12:29 PM
I received mine the other day. Thanks a lot.

Chris

Black89XR7
06-30-2011, 12:10 AM
I received mine on monday:D Thanks for setting this up Todd and keeping us informed with everything!:)

Travis

supercharged95
06-30-2011, 12:16 AM
just picked up mine- thanks again for arranging the group buy