Yes Another Rim Offset Question

XxSlowpokexX

Registered User
18x10 43mm Rear 285/40 or 275/45
18x9 36mm Front with a 255/45

These are made for a later model stang but the offsets are a bit off from what I normally see
 
Rear might need a very small spacer to clear the stab. bar, I remember my 19x10 at +40 being very close, and the larger diameter wheel lets it be tucked under on the rear farther. Also, the tire sizes are probably 285/40 or 275/40, if there is a 275/45, that would be too tall.

Front would be perfect, and 255/45 would match up with 285/40 for the height, which will be slightly taller than stock.


cheers
Ed N.
 
i agree with ED i did not notice the 45 profile on the 275...Where do you get your specs...You always pull a fast one. Why would you say 275/45 and then say 285/40 275/40 rears are near perfect curcumference to match stock. 245/45 front will be the match for that.
 
Nothing crazy..Its for the 05-10 Cobra Anniversary rims they now make

I wanted the 285 255 combo..Is there any mod I can do to the stabalizer to make it work???
 
If you rub on the stabilazer bar or the upper shock mount you will just need a small spacer. Something like 3mm, You will likely not need it but keep that in mind. You will need to move the brake cables away with some kind of metal strap as they will def rub on the rims if you dont have the stock plastic straps on there. Go for it, you will are not that far away that you cannot make it work. 3mm spacer should still give you hubcentricity/
 
Back
Top