help please

rwferguson

Registered User
Ok so I figured out that my icrm has gone bad. Now my cooling fans on all three wires and now neg. When I unplug the harness from the cooling fan only one is neg. So now both my pusher and puller fan are fried. So I am looking into an aftermarket setup with a puller and pusher fan with a temp sensor and relays. Anybody know anypart numbers for an aftermarket setup would be great. Also as much info would help as well, like if it a 16 inch or what not. Thanks for all your help in advance
 
fan

The stock rad fan is two speed, thus the three wires 1 ground two positive. high speed when A/C on low speed when A/C off. I would just get another ICRM, you can get a replacement fan motor from an auto parts store like napa. most of the aftermarket fans out there don't move enough CFM to keep our cars cool. Spall is about the best A/M fan you can get. I've been through a bunch of A/M fans and the spall is the best so far.
 
Back
Top