PDA

View Full Version : went to beaversprings today.



cas23
05-21-2011, 11:45 PM
well i finally took my '90 to the track. it felt pretty good off the line, then kinda dogged out..

1st T/S
-.093
60' - 1.95
330 - 6.072
1/8 - 9.622
mph - 68.33
1000 - 12.761
1/4 - 15.435
mph - 84.18

2nd best

-.094
1.963
6.050
9.529
70.15
12.588
15.201
86.07


this car, has a ported 94 blower, overdriven on the blower 5%, along with a stock size j/s pulley, stock motor(hurt as how its been running now) 73mm c&l 75mm t/b C4 with a 3k stall converter, 3.73 gears, motor is all stock, stock intercooler.

EDIT: stock size aum. jackshaft pulley

fasterthanyou
05-23-2011, 07:24 AM
wow, 10% od with a stock intercooler. I was only running 3% overdrive with a ported 94 case and a stock intercooler and my intake temps were 180degrees pulling a lot of timing. I dont know how hot 10% would be, but i know youre losing power with that much od and a stock ic. Get a double ic from ken wagner and an ic fan. You will notice an improvement in your track times.

mywhite89
05-23-2011, 03:53 PM
wow, 10% od with a stock intercooler. I was only running 3% overdrive with a ported 94 case and a stock intercooler and my intake temps were 180degrees pulling a lot of timing. I dont know how hot 10% would be, but i know youre losing power with that much od and a stock ic. Get a double ic from ken wagner and an ic fan. You will notice an improvement in your track times.

Agreed.

My 95 auto has similar mods as yours, 3.73 gears, stock converter, bigger maf, etc. It ran 14.2's last year. It has a good front mount intercooler and only 5% overdrive on the factory ported blower. I recommend a tune as well, and you will be right with my mine.
Chris

cas23
05-24-2011, 01:08 PM
well the heat is a slight problem as now i am having other issues so im putting a different motor in it out of a donar car i got. and i tohught i had a 5% jack shaft pulley, its a stock size sci alum. pulley. i got a set of heads and a cam to go in the motor ill be putting i and after that ill be doing a front mount.

Hock
05-28-2011, 03:58 PM
Are you still running the stock exhaust also?

But yeah, the intercooler is killing you.

We are gonna have to meet up sometime and so you can see my front mount. If your gonna be at Carlisle next Saturday you can see it there.

CurtisPaulfrey
05-28-2011, 04:07 PM
Have you thought about a dry shot of nitrous?

cas23
05-30-2011, 10:47 PM
Are you still running the stock exhaust also?

But yeah, the intercooler is killing you.

We are gonna have to meet up sometime and so you can see my front mount. If your gonna be at Carlisle next Saturday you can see it there.

it has a magnaflow res. on it dumping to 3 in. then 2.5 flowmasters, i think it was a cat back exhaust from scp. i wont be at carslile, i dont have the money to go there, a weekend id take a drive up to meet you though. just not nytime in the next month i wont be able to.


Have you thought about a dry shot of nitrous?

this motor is too far gone to think about nitrious. its a ticking timb bomb as it sits. i hate driving it how it runs as it is now.

XR7Kurt
06-10-2011, 12:52 PM
Nice consistency at the light, just about a tenth of a second too soon.:D