Radiator Drain Plug

Kent 48

Registered User
Well, I found out why I was loosing coolant. The drain plug just came out of the radiator. It looks like the threads are stripped off of it. Anyway, I need to get it back up and running while I'm waiting on a Griffin. So, question is... What kind of plastic are the tanks and plug made from? My intentions are to get a new plug ($?) and use a good adhesive to glue it into the tank until my "real" radiator comes in. Any suggestions on how to do this or what to use to attach the plug.
 
Problem or symtom

The same thing happened to a friends new metal rad on his 90SC. It turned out that his water pump was the problem so while you're in there, check it and the t-stat and use a new rad cap for good measure. good luck
 
Back
Top