Strut rod problems

neverfastenough

Registered User
Ill let the pic speak for itself.
b5195cb3.jpg

I have a 94 donor car. My car is a 90, are these interchangeable?

Corey
 
The rods are the same part number according to the local Ford dealership.

You can pick if you're using the rubber or metal snubber on the back end.

Might as well do the bushings while you've got it apart there, IMO.

RwP
 
Thanks for the quick reply, did you just call a dealer right now? or have you had this problem? Ill be replacing the bushings for sure

Corey
 
Thanks for the quick reply, did you just call a dealer right now? or have you had this problem? Ill be replacing the bushings for sure

Corey

Actually, no, but I checked back about six months ago. The 1995 uses a 92 or 93 up part, but the ROD is the same - they switched to a rubber snubber, which is part of the part # I looked up.

The rear bushing (and the front for that matter!) set is the same part number on both.

RwP
 
Back
Top