PDA

View Full Version : Parts wanted/for sale at the Shootout?



Mercutio
08-13-2011, 10:50 AM
Anyone looking for any parts at the shootout, or have any to sell? Save on shipping, etc.

WTB:

I'm looking for one of the coin holders that will replace a foglight/firm ride switch on a 94-95 SC. I know these coin holders came standard in the consoles of the 94-95 LX.

For sale:

Make me an offer. I'm just trying to recoup some travel costs with this stuff, not get rich.

Complete 3.27 TL differential in iron case
1 set grey tweed SC seats, front and rear
1-3/8 front sway bar w/bushings. Most of the powdercoating has flaked off.
1 set stock SC wheels
1 set stock LX fanblades
1 used 99/01 Cobra throttle body
92 decklid in good shape (red)
Taurus SHO 150 mph speedo (for the 96-97 guys)
2 sets IC tubes
1 polished shroud/fan for double IC setup
1 stock pusher fan
1 unused 7-inch SPAL electric fan
4 stock JBL speakers. I have no way of testing them, but if they don't work I'll give a refund.
Most of a gray 92 interior. If there's a specific part you need, let me know.
1 unused set of splined tuner-style lugnuts w/key. I won these in a raffle at the Shootout last year, but they won't work w/my Mustang hubs.

DrFishbone
08-15-2011, 11:22 AM
I'm looking for a complete kit for black interior (89-93) manual seatbelt swap.

I'll have a few parts for sale too...gotta take inventory first. :)

SCrazy
08-16-2011, 08:01 PM
I have a bunch of stuff I could drag out as well:

MP2 with MP Plenum and MP Top (Plenum and Top Chromed)
Chromed and polished inside stock IC Tubes
Ripper Shifter
'94 5-speed TX with fresh rebuild maybe 2k miles and 10 passes on it
McLeod Aluminum Flywheel
Flaming River Steering Joint
Addco 1-1/4" Sway Bars
B&M Hammer Reverse Pattern Ratcheting shifter for Automatic

Ira R.
08-17-2011, 08:46 AM
Anybody have the box in the trunk that controls the auto-ride system? For a '94. I'm pretty sure mine's shot.

I too have a box or more o'stuff. Lots of little things. Maybe I will throw them in the trunk if I can make room and see if anyone needs anything.

Ira

Mercutio
08-17-2011, 07:34 PM
Anybody have the box in the trunk that controls the auto-ride system? For a '94. I'm pretty sure mine's shot.

I too have a box or more o'stuff. Lots of little things. Maybe I will throw them in the trunk if I can make room and see if anyone needs anything.

Ira

Ira, I might have one from a 92. Let me take a look. If I can find it, I'll post the part number, and people smarter than me can tell us if it will work on a 94.

EDIT: FOUND IT.

Part number F1SF-18B008-BA. Looks just like an ECU and has code R5BA on it, but has "RCNTL" printed on the sticker, leading me to believe it is the ride control box.

Miller
08-17-2011, 08:33 PM
i sent mine to the scrap yard like a month ago Ira. u coulda had it for freeeeeeeeeee. gangstas dont use ARC......ughhh sry i shoulda asked!

Ira R.
08-18-2011, 11:36 AM
Ira, I might have one from a 92. Let me take a look. If I can find it, I'll post the part number, and people smarter than me can tell us if it will work on a 94.

EDIT: FOUND IT.

Part number F1SF-18B008-BA. Looks just like an ECU and has code R5BA on it, but has "RCNTL" printed on the sticker, leading me to believe it is the ride control box.

I will pull it apart and get the part number this weekend. Thanks Will.

Ira

90blkbrd
08-18-2011, 02:08 PM
I will pull it apart and get the part number this weekend. Thanks Will.

Ira

If not and it looks just like a EEC, I just gave one to David Dalke that I won in a parking lot raffle...at this time he doesn't know he has it as it was packed in a box with other items that he picked up yesterday.

Mercutio
08-18-2011, 05:50 PM
I will pull it apart and get the part number this weekend. Thanks Will.

Ira

Ira, I created a topic in the tech forum to ask whether it will work. So far the only responses indicate it may not:

http://sccoa.com/forums/showthread.php?t=121764

So if you want to try it out, I won't charge you for it up front. But you might want to keep searching.

90blkbrd
08-19-2011, 11:51 AM
For sale: empty aluminum mark VIII pumpkin with stock cover - $100 (~20 lbs lighter than a iron one)

BLOWN38
08-19-2011, 03:27 PM
For sale: empty aluminum mark VIII pumpkin with stock cover - $100 (~20 lbs lighter than a iron one)

Mike, I have a buddie interested in the pumpkin. I'll get back to you, he will most likely take it.

ricardoa1
08-19-2011, 03:34 PM
Spoiler for sale, Painted BLue...Two pedestal style. $85.00
I have some early style wheels if someone needs a set for slicks or somthing I only have three so I can sell them in singles.
Stock heads I got also, M90 rotor packs, cases, snout.

90blkbrd
08-20-2011, 09:38 AM
Brand new size XL 2009 shootout Tshirt. $20

I got 2 and this one has been hiding in my drawer since then.

PDQ SC
08-20-2011, 01:56 PM
Change of plans. New, unused aluminum with speedo gear. 500.00 delivered to shootout.:cool:

JeepsterSC
08-21-2011, 08:08 AM
For sale: empty aluminum mark VIII pumpkin with stock cover - $100 (~20 lbs lighter than a iron one)

I am also interested in the pumpkin if your other lead doesn't pan out

I am also in the market for:

Engine K member
Front bumper cover for 94/95 SC (preferably one that has not had front licence plate)
Radiator cradle
Instrument cluster bezel
Radio bezel
Auto shifter bezel
Mark VIII LCA's

Ira R.
08-23-2011, 07:08 AM
Ira, I might have one from a 92. Let me take a look. If I can find it, I'll post the part number, and people smarter than me can tell us if it will work on a 94.

EDIT: FOUND IT.

Part number F1SF-18B008-BA. Looks just like an ECU and has code R5BA on it, but has "RCNTL" printed on the sticker, leading me to believe it is the ride control box.

Mine says F2SF-18B008-AA and RC7A. Guess it isn't the same but thanks for trying. I should probably just unplug it for now.

Ira

David Neibert
08-23-2011, 05:47 PM
I'll be bringing the following parts to the Shootout to sell.

87mm Pro-M/Granatelli chrome bullet MAF (calibrated for 50# injectors) $150

3.5" MP chrome intake pipe (small rub mark from hood) $50 (includes silicone couplings and clamps) (SOLD)

S&B Powerstack air filter with inverted cone 4" ID x 7" Conical $25

Autometer dual gauge pillar pod (for 89-93 SC w/passive restraint) $20

David

PS: If 95mm TB is installed prior to shootout I'll also be bringing a Polished 85mm TB for $200

Nettlesd
08-23-2011, 07:47 PM
I'll take the tube.

David Neibert
08-24-2011, 02:39 PM
I'll take the tube.

Duane,

Are you talking to me ?

David

rzimmerl
08-28-2011, 03:48 PM
I may have a C&L 85mm tuner MAF, 3.5" Magnum Powers intake tube with clamps and couplers, and a large cone filter to fit that may have 4000 miles on it and is like new.

DrFishbone
08-30-2011, 12:31 PM
I need a 94/95 radiator fan assembly - anybody have an extra?

Dirtyd0g
08-30-2011, 02:35 PM
I just picked up a 99 transmission that needs rebuilt. Price will depend on what you need, but I picked it up very reasonably so the cost of the core is't very high. It would make a good mild level transmission for around $1200. Perfect for a 94/95 SC around 300rwhp or so.
Alan

DrFishbone
08-30-2011, 04:06 PM
Okay, here's some stuff that I either have or think I have laying around that I can bring to the Shootout. If anyone is interested, I'll grab some pictures for ya.

Alum rear lower control arms w/bolts - $100
Alum differential housing w/stock Mark VIII gears $125
Mark VIII MAFS (with electronics) - $25
Iron Rear end (painted black) - 3.27 gears (approx 120k miles) - $75
Iron rear end (unpainted) - 3.73 gears (less than 10k miles since gears installed/rebuilt) - $300
36# injectors 0 miles since rebuild/repaint/flow test - $125
K&N cone filter - $25 (might not want to sell)
ZR intake tube (has a quarter-sized dent on one side) - $40 (might not want to sell)
76mm MAFS housing & tube only - $110 (might not want to sell)


several spare superchargers & piping (need rebuilt) - $50 per supercharger $10 per IC tube
ground effects (white, blue parts, red) - $75 per white or red set, $25 for blue parts
89-93 Rear bumper (needs prep'ed & painted) - $50

DrFishbone
08-30-2011, 04:13 PM
I am also interested in the pumpkin if your other lead doesn't pan out

I am also in the market for:

Engine K member
Front bumper cover for 94/95 SC (preferably one that has not had front licence plate)
Radiator cradle
Instrument cluster bezel
Radio bezel
Auto shifter bezel
Mark VIII LCA's

Matt, I could probably hook you up with the control arms - let me know.

rzimmerl
08-31-2011, 08:43 AM
I will also have a Mark 8 single piece aluminum driveshaft that has been shortened and balanced for the AOD that I am replacing with my 3.5" Dynotech shaft. It has a new Ford Racing AOD yoke, new heavy duty non greasable U-joints, and rear pinion flange.

Will also have a Lotek triple gauge pod in black for the 89-93 cars with auto belts.

XR7 Dave
08-31-2011, 11:08 AM
Anyone have an extra 94/5 rear bumper insert? The black plastic smiley thing? I need one and will pay $$ for it.

jludorf
08-31-2011, 04:16 PM
I am looking for a pair of 26 x 10-1/2 ET street with rims for the shoot out. My wheels and tires are up in Edmonton and I will be flying down to race but it is not worth shipping them. I have 12" rear brakes so I will need them to be on stock rims or at least a 16" rim with the same offset so they fit my car.

E-mail Me at jludorf@shaw.ca, Call me at 780 819-4485 or PM me.


Thanks,

John

mellbutler
09-03-2011, 12:16 PM
Matt, I could probably hook you up with the control arms - let me know.

we'll take em:)

nickleman60
09-03-2011, 12:48 PM
I have a near mint 94 grey leather 60/40 rear folding seat, 94 sc radiator, 2 grey rear shelfs - 1 with 3rd light and 1 without (97 Sport LX version) I could bring if anyones interested.

http://www.sccoa.com/forums/showthread.php?t=121163

quick35th
09-04-2011, 03:37 PM
For sale:
1-3/8 front sway bar w/bushings. Most of the powdercoating has flaked off.


Will,

What would you take for the front sway bar?



I have a bunch of stuff I could drag out as well:

'94 5-speed TX with fresh rebuild maybe 2k miles and 10 passes on it
Flaming River Steering Joint
Addco 1-1/4" Sway Bars


How much are you trying to get out of those parts?

What I'm also looking for

-I'm looking for a clean radiator core support
-Clean rust free 89-93 SC doors, prefer 92/93 doors in silver
-Clean 89-93 SC front bumper, prefer 92/93 silver

Shane

fast Ed
09-04-2011, 08:24 PM
I have a mocha tan 94/95 5-speed console that needs a good cleanup, $125 would take that. I'll be coming along with Alan Stewart, we should have room to bring it down if someone is interested.

Also have a few other misc. bits that I should make a list of ... :)


cheers
Ed N.

nickleman60
09-04-2011, 08:38 PM
I also have front & rear sway bars off of an '89 SC, the biggest and beefiest of all the SC bars, make an offer.

rzimmerl
09-04-2011, 10:52 PM
I also have front & rear sway bars off of an '89 SC, the biggest and beefiest of all the SC bars, make an offer.

I'll take the rear bar.

jludorf
09-05-2011, 12:25 AM
I'll take it Ed. it matches my interior. How do you want payment?

John


I have a mocha tan 94/95 5-speed console that needs a good cleanup, $125 would take that. I'll be coming along with Alan Stewart, we should have room to bring it down if someone is interested.

Also have a few other misc. bits that I should make a list of ... :)


cheers
Ed N.

DriftingThunder
09-05-2011, 01:45 AM
I may have a C&L 85mm tuner MAF, 3.5" Magnum Powers intake tube with clamps and couplers, and a large cone filter to fit that may have 4000 miles on it and is like new.

I am interested in the MAF.

-Also, I have an extra 8-rib 10% pulley I may decide to sell.
-I definitely have an extra late-model blower with plenum and stock pulley. There is a little bit of play in it when you turn it though, and the rotor coating is about 50% flaked off. But you know the square port case is good!
-I have a used set of Richmond 3.55 ring and pinion gears for 8.8" rear. IMAGE: http://i89.photobucket.com/albums/k211/driftingthunder/0614011758.jpg
-I have a set of four 18 x 8" Kazera KZ-T rims (5 x 4.25 pattern) I can bring, one of them was repaired, but holds air great. I've been driving on them daily for a couple months and also went on a trip to Toledo, OH on them recently. Fair condition with a few dings and scuffs that I did not cause, but alas, they are there but they still look decent. I will include the proper lug nuts, key, and hub spacers. Just not the look I'm going for so I would sell them if someone wants them. I can get more pictures if need be. IMAGE: http://i89.photobucket.com/albums/k211/driftingthunder/01a0709011352.jpg

I think that's all I got... make offers! :)

DrFishbone
09-08-2011, 10:17 AM
Anybody have a pair of nice gray front seats? A little bolster wear is no big deal, long as there aren't any major tears / cloth missing. Leather preferred, but might consider cloth if the price is right.

ricardoa1
09-08-2011, 10:39 AM
I also have front & rear sway bars off of an '89 SC, the biggest and beefiest of all the SC bars, make an offer.


Would you split them? I just want a rear bar. I have 90 so the front should be the same as a 89 as far as I remember.

rzimmerl
09-08-2011, 10:43 AM
Would you split them? I just want a rear bar. I have 90 so the front should be the same as a 89 as far as I remember.

I called dibs, see 4 posts above(#33) :p:D

SCrazy
09-08-2011, 10:50 AM
If one of you guys winds up winning this little slap fight I have an Addco rear bar for the looser.

BLOWN38
09-08-2011, 11:05 AM
I have a full set of, front and rear, excellent shape black perferated seats. $400

kenewagner
09-08-2011, 11:37 AM
B&M Hammer Reverse Pattern Ratcheting shifter for Automatic

What did you replace the hammer shifter with. Just curious

Ken

SCrazy
09-08-2011, 12:40 PM
What did you replace the hammer shifter with. Just curious

Ken

The Hurst Quarter Stick....I definately like it better than the racheting shifter. My center console is kind of hacked now but that's a winter project.

quick35th
09-08-2011, 12:52 PM
If one of you guys winds up winning this little slap fight I have an Addco rear bar for the looser.

I think I asked what you wanted for your Addco bars and haven't gotten an answer yet. Also would like a price from Will for his front Addco sway bar. Come on guys! My PM box is full I know so either name a price here, email me : fastest35th@yahoo.com, or bring the parts to the shootout with a price in mind and we will go from there.

Shane

SCrazy
09-08-2011, 01:15 PM
Crap Shane...sorry about that.

How about $50 each delivered to the Shootout.

kenewagner
09-08-2011, 02:02 PM
The Hurst Quarter Stick....I definately like it better than the racheting shifter. My center console is kind of hacked now but that's a winter project.

Much need to make the Hurst fit? Any pictures?

quick35th
09-08-2011, 02:48 PM
Cool that works for me Brian! Thanks.

Still need to hear from you Will about the front Addco bar that you have.

Shane

90blkbrd
09-08-2011, 02:58 PM
For sale: empty aluminum mark VIII pumpkin with stock cover - $100 (~20 lbs lighter than a iron one)

This is still available.

David Neibert
09-08-2011, 03:37 PM
The Hurst Quarter Stick....I definately like it better than the racheting shifter. My center console is kind of hacked now but that's a winter project.

Brian,

Is that the same shifter Chris Wise was using on his turbo car ?

David

SCrazy
09-08-2011, 03:44 PM
Much need to make the Hurst fit? Any pictures?

I needed to make up a new mounting plate for the transmission tunnel since the stock one is shaped like a tub and I needed it to be flat but other than that the installation was pretty easy. Of course I had already gone through the headache of reworking the neutral safety and backup light wiring with the other shifter so that part was easy.

It's going to take a bunch of work to make the console look nice again, I'm certain my current hack would not fly on your car but the shifter itself is pretty compact, definately alot less complex than the racheting thing.

I don't have any pics but I could take some this weekend if you would like.

SCrazy
09-08-2011, 03:46 PM
Brian,

Is that the same shifter Chris Wise was using on his turbo car ?

David

I believe this is the same shifter Chris used....I remembered how nicely his worked and that it was a Hurst so I'm pretty certain this is the same one.

BLOWN38
09-08-2011, 04:38 PM
I also have 15" aluminum mini spares with bias ply hoosier skinnys. 300, drilled for either bird or stang pattern.

fast Ed
09-10-2011, 10:26 PM
Also have a good condition stock intercooler with an 8" (I think) fan, and a pair of fatshaft rear axle shafts. Probably won't bring these down unless someone specifically speaks up for them ahead of time. $50 for the IC and fan, $50 for the shafts?


cheers
Ed N.

Mercutio
09-11-2011, 01:43 PM
I would still really like to find one of the LX console-style coin holders to replace my firm ride switch. If you have one, please bring it.

DriftingThunder
09-11-2011, 09:01 PM
I would still really like to find one of the LX console-style coin holders to replace my firm ride switch. If you have one, please bring it.

I think I have one in my LX still. If I do you can have it. :)

quick35th
09-11-2011, 11:44 PM
Brian, how much money are you looking to get for your '94 5spd transmission?

Mercutio, still would love a price on the 1 3/8 front sway bar with bushings that you are trying to get rid of.

Shane

SCrazy
09-12-2011, 07:38 AM
Shane:

$50 for the sway bar
$225 for the transmission

Thanks
Brian

quick35th
09-12-2011, 02:20 PM
Brian:

Does the transmion grind in any gears?

If not I'll take it and both bars. Make sure it doesn't have any fluid in it for me please.

Shane

SCrazy
09-12-2011, 02:25 PM
Transmission worked perfectly....I removed it to install a C4 not because of any issues with the transmission. I'll load it all up for you, see you in a couple weeks.

r429460
09-12-2011, 06:02 PM
Pair of 275/50-15 M/T drag radials. Down to thw wear bars. $90.

Mercutio
09-12-2011, 09:13 PM
Brian, how much money are you looking to get for your '94 5spd transmission?

Mercutio, still would love a price on the 1 3/8 front sway bar with bushings that you are trying to get rid of.

Shane

Shane, I emailed you on that bar after your last request, but perhaps it didn't get to your inbox. $50.

DriftingThunder
09-12-2011, 10:12 PM
I'm looking for one of the coin holders that will replace a foglight/firm ride switch on a 94-95 SC. I know these coin holders came standard in the consoles of the 94-95 LX.

http://i89.photobucket.com/albums/k211/driftingthunder/94%20Thunderbird%20SC/0912012203.jpg

This is what you mean right? You can have one. If anyone wants the other one they can have it as well.

quick35th
09-14-2011, 07:10 AM
Shane, I emailed you on that bar after your last request, but perhaps it didn't get to your inbox. $50.

Sorry Will just have not checked my email in a few days. $50 is fine by me.

Shane

neverfastenough
09-15-2011, 11:01 AM
I have grey interior pieces, early car. Minty visors, glove box door, some trim pieces. Passive belt motors and tracks, a steering column and wheel. some cracked rear trunk tails, stock air box junk, sun roof glass, jbl sub box with amp and a 6x9 in it:rolleyes:. AOD dip stick tube, engine oil pickup tube. Polished stock IC top. Probably more stuff, ask.

CMac89
09-15-2011, 07:22 PM
I need a cheap, rear, lower seat of any color.

neverfastenough
09-15-2011, 07:24 PM
Ill bring you one fo free, think i have bottom and back in grey

Mercutio
09-16-2011, 05:54 PM
This is what you mean right? You can have one. If anyone wants the other one they can have it as well.

That is exactly what I'm after. Thanks!

Mercutio
09-16-2011, 05:55 PM
Sorry Will just have not checked my email in a few days. $50 is fine by me.

Shane

I'll load it in the car, then.

Quik95SC
09-20-2011, 04:42 PM
Does anyone have a dipstick they can bring to the shootout.

Just need the dipstick, not the entire tube.

PM if you have one, so we can meet up. I should be there Friday evening around 6:00pm

Smitty

DriftingThunder
09-21-2011, 10:59 PM
I am interested in the MAF.

-Also, I have an extra 8-rib 10% pulley I may decide to sell.
-I definitely have an extra late-model blower with plenum and stock pulley. There is a little bit of play in it when you turn it though, and the rotor coating is about 50% flaked off. But you know the square port case is good!
-I have a used set of Richmond 3.55 ring and pinion gears for 8.8" rear. IMAGE: http://i89.photobucket.com/albums/k211/driftingthunder/0614011758.jpg
-I have a set of four 18 x 8" Kazera KZ-T rims (5 x 4.25 pattern) I can bring, one of them was repaired, but holds air great. I've been driving on them daily for a couple months and also went on a trip to Toledo, OH on them recently. Fair condition with a few dings and scuffs that I did not cause, but alas, they are there but they still look decent. I will include the proper lug nuts, key, and hub spacers. Just not the look I'm going for so I would sell them if someone wants them. I can get more pictures if need be. IMAGE: http://i89.photobucket.com/albums/k211/driftingthunder/01a0709011352.jpg

I think that's all I got... make offers! :)
Just a quick update, I decided to not sell the pulley.
-I don't know what the late model (square port) blowers have been selling for, but if $100 is fair I'd let it and the plenum go. If not then talk me down!
-I'd sell the Richmond 3.55 gears for $75.
-I'd like to get $300 out of the wheels, but I need to make room in my garage so...
-I also have a chrome hot air intake kit thingy with couplers and a cone filter. I think the pipe is like 2.5" it's a pretty wussy setup but if someone wants to replace their stock tube I'd sell this for like $20 (lol).

fast Ed
09-22-2011, 05:51 PM
Digging through some small stuff ... these are all NOS pieces:

L/S corner taillamp for 92-95 SC
grille emblem for 89-93
L/S power door lock actuator all years
L/S mirror glass all years
hood support strut
roof moulding strips
various door (carpet) edge scuff plates
may have a complete set of side skirt attachment plates, have to see if I can find all of the pieces
some other assorted trim bits that I will bring if possible


Not sure how much room we'll have in Alan's car for bringing this stuff down, so send me a p.m. if there is something in this list that you definitely want.


thx,
Ed

mellbutler
09-22-2011, 09:59 PM
ok too tired to read this thread right now.....


we need for the shootout

93 compatible oil dipstick TUBE, tube onlyand
looking for a door lock actuator

and small pass side skirt (any color)

find me at the shootout:)


look for the black bird with etched/frosted bird on back window

mel

Dirtyd0g
09-22-2011, 10:01 PM
I have several late model fuel tanks if anyone needs one, they are almost impossible to ship and a common upgrade to the older cars.
Alan