BackinBlack89
Registered User
Does someone know what kind of wrench or size spanner wrench is needed to take off the Supercharger for 89 SC I need to remove to change the valve cover gaskets. Thanks
Spanner Wrench
- Thread starter BackinBlack89
- Start date
Melon
SCCoA Member
You don't need anything special to remove the supercharger.. well technically.
To make it easier, you can get a spanner wrench for the collar nut on the SC top. If you don't have one, you can loosen the bolts holding the top onto the blower itself and then the nuts holding the upper tube onto the intercooler.
If you do want the spanner wrench, Bill @ SCP sells them. http://www.supercoupeperformance.com
To make it easier, you can get a spanner wrench for the collar nut on the SC top. If you don't have one, you can loosen the bolts holding the top onto the blower itself and then the nuts holding the upper tube onto the intercooler.
If you do want the spanner wrench, Bill @ SCP sells them. http://www.supercoupeperformance.com