PDA

View Full Version : Rich is cleaning the garage...89-93 engine stuff



pro street rich
08-21-2011, 12:43 PM
Intercooler Tubes - Upper $10
Intercooler Tubes - Lower $10
Coil Packs - $20
Intercooler Boots - $5
Fuel Rails - $20
(6) 36# Injectors - $60...Sold
(6) 30# Injectors - $40 also have a set that is new...$65
Inlet Plenum - $40
Inlet Plenum with EGR - $50
Return Plenum - $40
Intercoolers - $25
Throttle Bodies - $15
Exhaust Manifolds - $30
Custom Short Down Tubes - $40
Custom Long Down Tubes - $50 sold
MAF's - $20 still have four more...Two already sold
AC Compressors - $50
Blower Tops - $25
Blowers - $100

All prices plus shipping. Ask if you are looking for anything else because I probably have it.

Rich

pro street rich
08-25-2011, 10:26 PM
also have a pair of 5 speed cars, one is a 89 the other a 93. both are complete, but the 93 has a rod knock in it...Let me know if someone wants anything from all this stuff....Rich

S_Mazza
08-25-2011, 11:34 PM
Got any 91-93 MAFs? The 70mm version?

r1dd1ck913
08-25-2011, 11:41 PM
What do you mean by custom long down tubs. Do you mean headers? I would be interested.

BECERRASC
08-25-2011, 11:48 PM
sent thanks let me know

1QUICKDAD
08-26-2011, 01:34 AM
yeah pics of the short down tubes?

qc89SC
08-26-2011, 10:57 AM
curious about the short and long tube too is it custom headers???
if it is is it possible to see a photo!
and would it be better than modified mac shorty?

Plat0ribs
08-26-2011, 01:11 PM
Down tubes attach to the manifolds so I would not assume these are headers since that part would replace the manifold.

Think manifold to catback pipe...

pro street rich
08-26-2011, 04:39 PM
Got any 91-93 MAFs? The 70mm version?

There is one there, I will open up my 93 to double check the size and then we should be good to go.....Rich

pro street rich
08-26-2011, 04:45 PM
What do you mean by custom long down tubs. Do you mean headers? I would be interested.

someone else posted on that. These are tubes that go where your cat's were. This is the first step to get rid of that bad bend on your stock exhaust system. I will try to post up some pic's for you guys.
One set was shorter that the other. Two different people made them when they were getting rid of their cat's. I think the longer ones are the better set. They were on a car that I got from texas from one of the faster guys at the time. They have not been in the weather so they are just better. look for the pic's to follow this weekend.....Rich

r1dd1ck913
08-26-2011, 04:48 PM
Ok thanks I will be watching for the pics.

S_Mazza
08-28-2011, 09:38 AM
There is one there, I will open up my 93 to double check the size and then we should be good to go.....Rich

Sounds good. Let me know.

pro street rich
08-28-2011, 12:51 PM
pic's attached

pro street rich
08-28-2011, 12:55 PM
Got any 91-93 MAFs? The 70mm version?

yes, I do have one for you. let me know what you want to do from here....Rich

rlittlep
08-28-2011, 03:58 PM
also have a pair of 5 speed cars, one is a 89 the other a 93. both are complete, but the 93 has a rod knock in it...Let me know if someone wants anything from all this stuff....Rich

By ANY chance is the 93 5spd a gray interior? Need the console{5psd Boot cond not important} in 93 Gray...MUST BE A 93..

pro street rich
08-28-2011, 05:04 PM
By ANY chance is the 93 5spd a gray interior? Need the console{5psd Boot cond not important} in 93 Gray...MUST BE A 93..

yes it is grey leather, but I want to sell it complete for right now...Rich

pro street rich
09-01-2011, 11:04 PM
For those who did buy some stuff your parts are in the boxes and on your way, thanks, but there are still a lot of other parts waiting for a new home...

NH89SC
09-03-2011, 10:26 PM
looking for a timing cover for my 89 SC.

pro street rich
09-05-2011, 01:16 PM
looking for a timing cover for my 89 SC.

I have one, p.m. sent... thanks..

pro street rich
09-11-2011, 07:49 PM
Hey guys all parts are sent ouy to those that have paid for them. I still have a heck of a lot of parts to get gone. Keep in mind there are two complete cars up for the taking as well as four other cars that are just parts by now.
Let me know what you need, not everything is listed, so feel free to ask if it is here......Rich

sam jones
09-12-2011, 07:12 PM
Hello Mr. Pro street rich

Do you have a power steering pulley?

1QUICKDAD
09-13-2011, 04:39 AM
how bad is rust on the short tubes??Is it almost thru the pipe??

davec73
09-13-2011, 07:17 AM
you have anything bigger than a 70mm maf? If so how much shipped

pro street rich
09-13-2011, 07:46 AM
how bad is rust on the short tubes??Is it almost thru the pipe??

I would toss them if they were soft. These will work for you for some time to come. They don't move when you give them the pillers test....Rich

pro street rich
09-13-2011, 07:48 AM
Hello Mr. Pro street rich

Do you have a power steering pulley?

before I go too far with this I would have to pull one off the pump to make sure it comes off ok.....Rich

sam jones
09-13-2011, 08:48 AM
Good morning Mr. Pro Street Rich

Once you get the pulley off please let me know.

Thanks.

sam jones
09-14-2011, 10:31 PM
Good evening Mr. Pro Street Rich


Sorry. I just purchased a power steering pulley locally.

1fstb1rd
09-15-2011, 10:30 PM
do you happen to still have the down tubes? or any 94/95 parts? any aftermarket stuff or 36 fuel injectors?

1fstb1rd
09-15-2011, 10:31 PM
if you have a high pressure hose minus the EVO for a 89 let me know also..

pro street rich
09-16-2011, 07:59 PM
you have anything bigger than a 70mm maf? If so how much shipped

sorry I don't have anything bigger...Rich

pro street rich
09-16-2011, 08:02 PM
do you happen to still have the down tubes? or any 94/95 parts? any aftermarket stuff or 36 fuel injectors?

I have the down tubes yet. As for 94-5 stuff not right now, sorry...Rich

pro street rich
09-16-2011, 08:03 PM
if you have a high pressure hose minus the EVO for a 89 let me know also..

tell me more as to what this part is. If you mean the hose for the power steering, I should have one of those...Rich

pro street rich
10-08-2011, 01:00 PM
to the top...

quick35th
10-08-2011, 10:45 PM
What color is the 93 5spd and is the shell clean or rusty?

Shane

debriga
10-10-2011, 03:18 PM
Would you have the radiator fan blade, or the motor and blade assembly? How much?

mustangdan65
10-23-2011, 11:45 PM
Do you happen to have one? Need it shipped to 99205.
Thanks,
Dan

pro street rich
10-25-2011, 09:20 AM
What color is the 93 5spd and is the shell clean or rusty?

Shane

The body is not rusty, but there is some body work needed for the right side. Car scrapped the front end of a truck when it was parked and the driver turned too sharp. The car is black with a grey insides....Rich

pro street rich
10-25-2011, 09:22 AM
Do you happen to have one? Need it shipped to 99205.
Thanks,
Dan

Yes there is one left , pm me with where you need it shipped to and I will work out the price, last one was $10 for shipping....Rich

pro street rich
10-25-2011, 09:27 AM
Would you have the radiator fan blade, or the motor and blade assembly? How much?

let me check out the shipping for you where are you, zip code??, I know I have a fan complete that is good to go....Rich

mustangdan65
10-25-2011, 10:13 AM
PM Sent...

jangus
10-25-2011, 12:39 PM
Did you receive my PM on the throttle bodies?

jerrybrhea
10-26-2011, 03:53 PM
Do you have a master cylinder reservoir to fit the '90?

pro street rich
10-26-2011, 07:58 PM
Would you have the radiator fan blade, or the motor and blade assembly? How much?

make it $25 plus shipping and it is yours. This is the complete fan assby off a 90 bird.

pro street rich
10-26-2011, 07:59 PM
Do you have a master cylinder reservoir to fit the '90?

make it $25 plus shipping so how does that sound.....Rich

pro street rich
10-28-2011, 12:05 PM
also have a pair of 5 speed cars, one is a 89 the other a 93. both are complete, but the 93 has a rod knock in it...Let me know if someone wants anything from all this stuff....Rich

The 89 5 speed car is now sold. still have the 93, does anyone want this one??