PDA

View Full Version : calling Dan



90scmxdream
08-24-2011, 06:06 PM
Hi Dan ,remember the switch you gave me for my non working fan on my sc,
its toast and I have one in hand that said is 16 amp.but I think the one you gave me it was 20 amp. its safe to use the 16a or I need to buy a 20amp ?
if you want you can gave me a call. 408 4380409.thank you as always.:confused:

Ddubb
08-26-2011, 05:45 PM
16 amps is still pretty big. The switch doesnt run any power through it, its just a ground. So any amp would work fine - the problem is the switch contacts inside arent making a good connection. If you just took the wire and put it to ground, it will run the electric fan also.



- Dan


Hi Dan ,remember the switch you gave me for my non working fan on my sc,
its toast and I have one in hand that said is 16 amp.but I think the one you gave me it was 20 amp. its safe to use the 16a or I need to buy a 20amp ?
if you want you can gave me a call..thank you as always.:confused:

90scmxdream
08-26-2011, 09:01 PM
thank you Dan. do you still live at the same place ?
jose

Ddubb
08-27-2011, 12:59 AM
thank you Dan. do you still live at the same place ?
jose

... still here. ;)


- Dan

90scmxdream
08-30-2011, 07:00 PM
I am asking because a have a leak at a brake sensor ,and I will like you to take a look and if you can fix it , I pay you for your help.thank you I hope to see you soon .jose

Ddubb
08-31-2011, 12:05 AM
Hope its not the high pressure sensor on the ABS master ... :p

- Dan

90scmxdream
08-31-2011, 06:07 PM
I hope not too when can you look at the car ? I will be off work fry,sat and sun , gave me a call 4380409. jose