Need a little wiring help

W

wisupercoupe

Registered User
I have searched and cannot find an answer.
I added a custom dash into my bird and now need a little wiring help. The VMM has been removed as I need a spot to located my electric fan switches. Do I need to jumper anything there to get the signal up to the dash wiring? Also, which wire in the two connectors is the fuel level wire?

I also would like a wiring diagram of the radio, the old unit has been taken out and I would like to put a new one in. This is an 89' with a 460 in it by the way. Thank you for all your help.
 
No you don't need the VMM for the dash to work. They feed off of a junction block, one wire goes to the VMM, the other to the dash.

To give you the wiring for the old dash harness, I'd have to know which dash it was, and presume the 1991 was the same as your 89. The VMM, OTOH, is the same for both.

Radio - was it standard, premium, or JBL? The connectors are different (the one that's the same in all three IS the same in all three, but the output - speaker or line - is different between standard and premium/JBL .)

RwP
 
You must log in or register to reply here.
Back
Top