maf

lowflying90

Registered User
if i have a stock 70 mm maf for 30 lb injectors and i buy 36 or 38 lb injectors, what do i need to do to my maf to calibrate it for these? get new electronics? or just the sampling tube?

Thanks,
Jeff
 
Last edited:
What MAF do you have??

Hey Jeff, it all depends on what MAF you have. The Pro-M unit will need to be taken to a performance shop with the calibrator, or sent back to Pro-M in Michigan for new calibration. The C&L unit would require a new sampling tube, to match the injector size. Sampling tubes are available from http://www.supercoupeperformance.com.

Good Luck
Luke
 
Back
Top