Slot Maf transfer function

R

Roadhawg

Registered User
I decided to switch over to a new Mustang Slot Maf 4G7V-12B579-AA in a 3.5" inlet with 60lb injectors in a 3.8L.
I was wondering in anyone had a similar comb with the Maf transfer function numbers.

Thanks,
Todd
 
I have the stock slot maf in a 4" tube with 60s'. I have an excel program that calculates the transfer from the tube size which should get you close.
 

Attachments

  • VER2.4slot.csv
    1.9 KB · Views: 140
Last edited:
rzimmerl said:
I have the stock slot maf in a 4" tube with 60s'. I have an excel program that calculates the transfer from the tube size which should get you close.
Click to expand...


Thanks for the file except the .csv is a text only file and the formulas do not transfer.
I went back and measured and the pipe has an outside OD of 3.5" and a ID of 3.25"
 
Todd send me a PM with your email and I can send the file to you. I'll post the data for the 3.25 tube also.
 

Attachments

  • todd325.csv
    1.9 KB · Views: 87
Last edited:
You must log in or register to reply here.
Back
Top