Well finally got the engine I've been working on in the car and set up, today is d day, got everything in, set the (also have to set up the throttle body), cranked it, it just cranks, no sputter or anything just cranking. Checked spark at the coil, got spark, got fuel at the rail, no upshift light while cranking, got a tach signal, this engine previously ran perfectly.
I guess what my question is, is there anything that can stop an engine from running on the trans? Or anywhere else for that matter? I checked all fuses and such, went thought all basic diagnostics. I didn't touch the cam stalk timing or anything internal on the motor.
I bolted the battery ground to the engine mount using a bolt and not the stud with the bolt on it, could that be my issue, but would the battery still have good voltage? Months of hard work and im losing hope, in sorry if this makes no sense and for bad grammar and punctuation, but I'm outside in the cold working on this car typing from my phone, thanks everyone
I guess what my question is, is there anything that can stop an engine from running on the trans? Or anywhere else for that matter? I checked all fuses and such, went thought all basic diagnostics. I didn't touch the cam stalk timing or anything internal on the motor.
I bolted the battery ground to the engine mount using a bolt and not the stud with the bolt on it, could that be my issue, but would the battery still have good voltage? Months of hard work and im losing hope, in sorry if this makes no sense and for bad grammar and punctuation, but I'm outside in the cold working on this car typing from my phone, thanks everyone