please help! pulling blower

steveos89xr7

Registered User
I have an 89 cougar sc Im in the process of pulling my blower for a rebuild due to a teribble knock! I have the blower loose, the throttle body detached...... something towards the rear is holding it down? I cant see or figure whats holding it down so i gave up for the night, help me out guys. Also i was thinking on going through magnum powers for rebuild. Does that port and polish perform, worth it? they say 20-25 more hp.
 
i see the egr valve but how do i remove it or leave it connected? what a headace just want this blower off! thanks for the help!
 
there will be 2 10mm bolts holding it on the back of the blower plenum, remove the passenger cowl plastic and wiper, use a 1/4in socket wrench and remove the 2 bolts. Usually takes me about 10 min to do this.

Hope this helps
 
Back
Top