I know this has been gone over a million times, but I dont remember any kinda solution.
Someeeeeeeetimes, the car just wont crank. it will click, but not crank. once and a while it wont click.... By the under hood fuse box, there is the connector where the wire goes over to the starter to enguage it. I put my meter on it, and when it wouldnt start, its only seeing 9v. If I put a jumper wire from the megafuse nut, to the wire ( with the key forward ) the car cranks and starts right up.
I am wondering if this would be an ignition switch problem, even tho it turns over meaning the ignition is completing that circuit ? or is there a bad connection somewhere ? I feel like a dope when I have to hotwire my car in the 7-11 parkinglot to get it to start.
Someeeeeeeetimes, the car just wont crank. it will click, but not crank. once and a while it wont click.... By the under hood fuse box, there is the connector where the wire goes over to the starter to enguage it. I put my meter on it, and when it wouldnt start, its only seeing 9v. If I put a jumper wire from the megafuse nut, to the wire ( with the key forward ) the car cranks and starts right up.
I am wondering if this would be an ignition switch problem, even tho it turns over meaning the ignition is completing that circuit ? or is there a bad connection somewhere ? I feel like a dope when I have to hotwire my car in the 7-11 parkinglot to get it to start.