View Full Version : Plugs and wires

Chris Ashford
04-14-2012, 03:36 PM
Ok this is gonna sound kinda dumb, but other than sc piping, what all am I going to have to pull to make enough room to change the plugs and wires on a stock '89 3.8? Thanks in advance.

04-14-2012, 06:14 PM
I can do it without removing anything except the intake tube. Get yourself a 3/8 drive flex head rachet from Snap On with 80 tooth pawl. That will save you tons of time. Wobble extensions are also very handy. There is a write up @ www.sccoia.org in the articles section on how to access each plug. some are better done from the top and some from the bottom