s/c bolt sizes

boogeyman

boogeyman

Registered User
did some searching i need to know what size the bolts that hold the nose to the case are on the supercharger i want to use polished hex head bolts and make it pretty
superblower.jpg

im going to sand the ribs and polish them and use polished hardware should look nice once i do the blower top the upper cooler tube and inlet plenum to match
 
Last edited:
I used some Allen head bolts from fastenal. Someone correct me if they have different. The sc case bolts are m8 x 55 and are the same size as the intake manifold bolts. Also the sc top are m8 x 25, Tb is m8 x 35. Hope that helps

Zack
 
CenTexSC said:
I used some Allen head bolts from fastenal. Someone correct me if they have different. The sc case bolts are m8 x 55 and are the same size as the intake manifold bolts. Also the sc top are m8 x 25, Tb is m8 x 35. Hope that helps

Zack
Click to expand...

M8 x 1.25 and then the lengths you listed above;)

I could be wrong BUT I think the blower top bolts can be a 30mm long that way more of the threads will be used (less chance of stripping the threads). I will have to check my stock of the SS bolts
 
You must log in or register to reply here.
Back
Top