wheel fitment question

blownbird2

Registered User
hey everybody i have a chance to buy these off a friend. 20x10.5 they have the mustang pattern. in the pics u can see how far the stick out but they are just leaning on the lugs. do you guys think they will fit in the well if i do the hub swap. im not a fan of wheels hanging way out of the fenders alittle is ok
 

Attachments

  • 042412193058.jpg
    042412193058.jpg
    387.1 KB · Views: 70
  • 042412192830.jpg
    042412192830.jpg
    257.8 KB · Views: 72
  • 042412193155.jpg
    042412193155.jpg
    218.4 KB · Views: 66
  • 042412192456.jpg
    042412192456.jpg
    358.5 KB · Views: 79
Last edited:
10" is about it for the rear without it sticking out at all, and it has to be around +40 offset to tuck under enough. What size are the front wheels? No way that size going under front fenders, if they are all 4 the same size.


cheers
Ed
 
size

the rears are 275's and the fronts he still has i just brought one home to try. i think are 245 8-1'2x20


10" is about it for the rear without it sticking out at all, and it has to be around +40 offset to tuck under enough. What size are the front wheels? No way that size going under front fenders, if they are all 4 the same size.

the rears are 275's and the fronts he still has i just brought one home to try. i think are 245 8-1'2x20
cheers
Ed
 
Not sure that they will fit "in the well," but they will be close enough. I'm pretty sure the lip will cut into the tire so you'll need to roll the lip or keep some airbags pumped up.
 
Back
Top