90sc35thann
Registered User
I dropped off all of my engine parts to the machine shop today. I am more nervous than usual. I moved 4 years ago and I am using a machine shop that I have never used in the past. I am nervous as hell and now the waiting begins. I am know you have all been there. This is the worst part of this entire process. WAITING, UGH!
This is what i am getting done from the machine shop
Deck the block just to clean it up a bit and square it to the mains
Bore .020 over
new cam bearings
Rebuild the heads - guides, valve job, etc.
new valve springs and spring cups to accommodate my new cam
resurface the heads
This is what i am getting done from the machine shop
Deck the block just to clean it up a bit and square it to the mains
Bore .020 over
new cam bearings
Rebuild the heads - guides, valve job, etc.
new valve springs and spring cups to accommodate my new cam
resurface the heads