Raised top bolt lenth

try2v8

Registered User
For some reason I thought the bolts for the stock top would fit. Duh.... Anyways need to know the proper length of bolt for the new raised top. Thanks
 
A Magnum Powers raised top uses stock length bolts. If it is a home brewed raised top it may require longer bolts because the flange is usually thicker then stock.
 
Yep I see that

Yep I see that a home fabed top needs longer bolts. Need to know the proper lenth for it.
 
Yep I see that a home fabed top needs longer bolts. Need to know the proper lenth for it.
It really depends on the home brew. If you still have the original bolts and top, stick and original bolt through the original top and measure how much it stick through, then take the raised top to your local hardware store and find a bolt that sticks out the same amount.
 
Back
Top