wiring!!! i searched for two days!!!

ghostryder

Registered User
i have searched prior threads for two days. i did the trunk swap but my trunk release button does not work. i have a 92 deck lid on a 90 i wired the led and they work . the 90 has 6 wires the 92 5 wires this is how i wired according to schematic i found

black---black
black/pink-----black/pink
purple/yellow--- purple/yellow
brown---brown
green/yellow---white/yellow

i have a brown/white on the 90 wire harness :confused::cool:

does anyone know where i hook this brown/white wire :cool:

need some advice!!!
 
what does MFS stand for? is that a possibility why my trunk lock does not work?

Multi Function Switch - aka "turn signal switch" and "effin' ~~~" :p

Nope, that won't be why it doesn't work.

So if you connect a light where the trunk solenoid goes (NOT a LED, but a LIGHT, like a backup light), does it light up?

RwP
 
the trunk opens when i use the keypad but not when i use the button in the glove box all wire are hooked up. possibly a bad push button:confused::rolleyes:
 
the trunk opens when i use the keypad but not when i use the button in the glove box all wire are hooked up. possibly a bad push button:confused::rolleyes:
You can easily check the switch by disconnecting the wires and using a meter to check the continuity across the switch.
 
Back
Top