what is required to run 1.73 roller rockers on stock valves. thanks
try2v8 Registered User Jul 16, 2012 #1 what is required to run 1.73 roller rockers on stock valves. thanks
90sc35thann Registered User Jul 16, 2012 #2 try2v8 said: what is required to run 1.73 roller rockers on stock valves. thanks Click to expand... All that is needed is a set of scorpion pedestal mount roller rockers. Then you would need to use shims to set preload. The best way would be to have the heads machined to accept a stud and use stud style rockers.
try2v8 said: what is required to run 1.73 roller rockers on stock valves. thanks Click to expand... All that is needed is a set of scorpion pedestal mount roller rockers. Then you would need to use shims to set preload. The best way would be to have the heads machined to accept a stud and use stud style rockers.
90sc35thann Registered User Jul 17, 2012 #4 try2v8 said: What size shims? And were can I pick a set up? Click to expand... http://www.summitracing.com/parts/CRN-99170-1/ Dave Dalke has a great post on here somewhere about setting preload. You may want to give it a search. Good luck!
try2v8 said: What size shims? And were can I pick a set up? Click to expand... http://www.summitracing.com/parts/CRN-99170-1/ Dave Dalke has a great post on here somewhere about setting preload. You may want to give it a search. Good luck!