PDA

View Full Version : MSD 32999 Plug wires



davec73
08-29-2012, 09:33 PM
I will start by saying I really like MSDs products so I experimented and bought a set that are labled for a 2000 mustang with a 3.8 and they fit! They dont look as if they would from the pictures so I also bought a set of the multi angle ends just in case but just to let you guys that want to run something other than Taylor Or live wire they do work!

scskydivin
08-30-2012, 02:50 PM
How do they look?

Quik95SC
08-30-2012, 02:57 PM
These wires are available at Autozone as a special order. They are $80.99 and you should be able to get them in about 4-5 days. Here is what they look like: They will have to look up as a cross reference of MS32999


Smitty

David Neibert
08-30-2012, 03:07 PM
I will start by saying I really like MSDs products so I experimented and bought a set that are labled for a 2000 mustang with a 3.8 and they fit! They dont look as if they would from the pictures so I also bought a set of the multi angle ends just in case but just to let you guys that want to run something other than Taylor Or live wire they do work!

Dave,

Do the MSD wires have clips to hold the wires on the coil pack ? Did you have to change any of the spark plug boots ?

David

Quik95SC
08-30-2012, 04:00 PM
Dave,

Do the MSD wires have clips to hold the wires on the coil pack ?
David

David,
I saw this too, and was wondering if this was a "stock Photo" of other MSD wires and perhaps not the ones specific to the application. Then again I remember a lot of Distributor and other coils that don't have any clips keeping them attached to the coil pack, how neccessary are they really??

Just wondering about things that make you go hhhmmm.....

Anyway I will likely stick to the Taylors Spiral Cores I am using now because they do have the clips and are 8.5mm and work just great. A tad cheaper too.

Smitty

davec73
08-30-2012, 04:02 PM
They look just like those wires but they have the nice clip on the top for the coil and the straight boot at the spark plug just like the taylors I had. I ordered mine from Summit

Quik95SC
08-30-2012, 04:04 PM
They look just like those wires but they have the nice clip on the top for the coil and the straight boot at the spark plug just like the taylors I had. I ordered mine from Summit

Thats a good thing then, sounds like we have a winner for another reputable company making stuff that will fit our SC's even if not originally intended to.

Smitty

davec73
08-30-2012, 05:00 PM
Dave,

Do the MSD wires have clips to hold the wires on the coil pack ? Did you have to change any of the spark plug boots ?

David

Here you go! I have to get my motor together with them on but they are 75ish plus shipping from summit and the guy said I could send them back if they didnt work but looks like they will the drivers sid is close but I think they are going to fit great



http://i240.photobucket.com/albums/ff228/thunder71173/msd2.jpg
http://i240.photobucket.com/albums/ff228/thunder71173/msd.jpg

davec73
08-30-2012, 05:02 PM
Thats a good thing then, sounds like we have a winner for another reputable company making stuff that will fit our SC's even if not originally intended to.

Smitty

They used to make a specific set for our cars the guy at summit that I talked to has an sc! however he didnt even know if these would work so I had to go out on my own to find out

DLF
08-30-2012, 11:59 PM
You might want to change the way you've routed the passenger side wires at the coil. ;)

XxSlowpokexX
08-31-2012, 12:01 AM
you can just get the ford motorsport wires as well for a 4.6

davec73
08-31-2012, 12:16 AM
you can just get the ford motorsport wires as well for a 4.6

I thought about that but Ive got an msd coil pack and they really stand behind there products, something I dont like to ignor

davec73
08-31-2012, 12:17 AM
You might want to change the way you've routed the passenger side wires at the coil. ;)

They fit well the way I have them but I will try it when I get everything mounted up