PDA

View Full Version : Wiring



kenewagner
09-11-2012, 02:57 PM
Hooking up some of the wiring left before start up. Cant remember which wire is correct for the oil sending unit and which one goes to the sensor at the top of the thermostat housing. One is red with a white or yellow stripe, the other is a white or yellow with a thin red stripe. Thanks

Kenny

ALS35
09-11-2012, 03:04 PM
Ken;
On mine the red boot goes on the oil sender and the black boot goes on the water temp sender. Don't know the wire colours. Oh, and the way that the harness is put togther they only reach if correct.
Alan

jimv90sc
09-11-2012, 07:20 PM
red wire with white stripe is the water temp sender. white wire with red stripe is the oil sender.

90sc35thann
09-11-2012, 08:53 PM
Ken;
On mine the red boot goes on the oil sender and the black boot goes on the water temp sender. Don't know the wire colours. Oh, and the way that the harness is put togther they only reach if correct.
Alan

X2 to that

shoalcracker
09-11-2012, 09:30 PM
Still can't figure out why black boot wouldn't be oil and red wouldn't be Hot Water.:confused:

If it was a quizz I'd definately be leaning towards logic.

Paul

ALS35
09-12-2012, 07:47 AM
Logic? This is a Supercoupe. 'Nuff said.
Alan

kenewagner
09-12-2012, 08:00 AM
red wire with white stripe is the water temp sender. white wire with red stripe is the oil sender.

Cool, thanks

Ken

neverfastenough
09-12-2012, 09:11 AM
Taking ~~~~ apart and you dont remember how to put it back together:p

kenewagner
09-12-2012, 09:16 AM
Taking ~~~~ apart and you dont remember how to put it back together:p

Just wait corey;) when you have gray hairs for real you wont remember ~~~~either;):D