PDA

View Full Version : Tail light question



shocar4
10-09-2012, 07:16 PM
When I turn my lights on, I have the 2 corner rears illuminate , but when I hit the brake those same lights get brighter like brake lights should along with the third light in the rear window.....nothing coming on in my center 2 rear lights (ones with the t-bird logo)....are these tail lights or brakes...and what would cause this other than the bulbs...no fuses blown @ all!

Melon
10-09-2012, 07:24 PM
The center lights (LED lights on the trunk) just light up with the park/headlights. They don't come on with the brakes or turn signals.

r1dd1ck913
10-09-2012, 08:13 PM
What year is your car? If it is a 89-91 the part on the trunk does nothing. If it is a 92 or up then the trunk lights are just led running lights.

shocar4
10-09-2012, 08:54 PM
Well then I have no led working....any ideas?

shocar4
10-09-2012, 08:56 PM
Prob solved.....1990

r1dd1ck913
10-09-2012, 09:00 PM
LOL it is a good idea any time you are asking a question to include the year of your car that way you don't get misinformed.

shocar4
10-09-2012, 09:16 PM
Will do bro! Thx again guys

Melon
10-09-2012, 10:09 PM
If you decide you want the LED tail lights, you'll have to swap trunk lids too since the LED tails are round and separate (left side/right side) where the flat panel is all one piece on the trunk.

ThunderRoad
10-22-2012, 04:50 PM
WHAT I DID WAS CUT THE BLACK -PLASTIC BEHIND THE BIRD LOGO:) ABOUT 3x10 IN WIDE THEN DID THE SAME THING TO THE TRUNK LID:) THERE IS LIGHTS HOLES ON THE INSIDE OF THE TRUNK:eek: WIRED IT TO THE BRAKE AND TURN SINGNIAL LIGHTS ON EACH SIDE :rolleyes: THEN THEY WORK ALL THE TIME :D ABOUT 1-1/2 HOURS OF WORK :p NEED A THIN WHEEL TO CUT OPEN OR DRILL HOLES IN TRUNK FOR A SAWSALL;)

terralex
04-21-2013, 01:11 AM
Prob solved.....1990

Just add it in your signature and it's always there.