Fog lights (aftermarket) won't work

spetz01

Registered User
I've installed some new LED strips basically to fill the fog light hole. I know both lights work cause I jumped them at the battery to see if they did.

With the headlights on low on, and the fog light switch on, indicated by the the little orange light, I've got no juice at the lamp harness.

The 15 amp fuse is good, can't find anything else that sticks out that may be the problem.

Any ideas?
 
in my experiance if you try to wire aftermarket lights to the factory harness it will burn up the multi function switch. (turn signal)
 
This is the second set I've run. The first set were great until a rock took one out. I pulled those out years ago while doing my build up. Those two lines were just cut and left for the last bunch of years. I thought maybe the fuse might have blown but it good.

Multifunction switch then? Were would that be found ?
 
The multifunction switch is the switch on the steering column. It controls the turn signals, high beams, and wiper.
 
Back
Top