MAF question

Beer_Tom

Registered User
Hi all,
I'm trying to come up with an easy cheap way to increase air flow to my motor. I have a 1996 LX 4.6L. I'm starting to do my research and I find a lot of conflicting information. I have a few questions I'm hoping to get answered. First question: If I upgrade my MAF to 80mm do I need to replace the ecu or have it tuned? Second: Could I get away with getting a MAF off a used '03 mustang cobra and reuse my stock wiring harness? Any input would be helpful.
Thanks,
Tom
 
Your motor doesn't need a bigger MAF. The stock sensor is fine until you have significantly increased power via other methods. In either case, tuning would most definitely be required.
 
Back
Top