Question about SC engine swap

J

jamesdubbeld

Registered User
Hey guys,
Will an engine from a '95 bird fit into a '92 with no problem? Are there sensor differences and fuel system differences?
Anyone have some advice?
 
jamesdubbeld said:
Hey guys,
Will an engine from a '95 bird fit into a '92 with no problem? Are there sensor differences and fuel system differences?
Anyone have some advice?
Click to expand...

the oil pan on a 95 is physically the same however it is missing the oil level sensor.

The timing cover is different on the 95 and uses a different crankshaft sensor.

The crankshaft dampener is different due to the change in the pick up for the crankshaft sensor.

The FPR on the 95 is a two bolt variety but that shouldn't make a difference in fitment.

Those are the major differences I am aware of.
 
90sc35thann said:
the oil pan on a 95 is physically the same however it is missing the oil level sensor.

The timing cover is different on the 95 and uses a different crankshaft sensor.

The crankshaft dampener is different due to the change in the pick up for the crankshaft sensor.

The FPR on the 95 is a two bolt variety but that shouldn't make a difference in fitment.

Those are the major differences I am aware of.
Click to expand...


You will have to use the dampner and crank sensor from the 92 unless you are going to rewire for EDIS instead of DIS. Its doable but not real easy. The 92 will have a 3 lobe sensor ring and the 95 will have a 36 tooth ring. Everything else should work ok.
 
You must log in or register to reply here.
Back
Top