PDA

View Full Version : PS pulley



90whtbrd
01-28-2013, 05:00 AM
Weather permitting will be hitting up the junk yard this week. I need a ps pulley,the one I have now is walking off the end of the ps shaft. I did use some used 600 grit wet & dry paper to clean the rust off, but not at all aggressively, maybe it got bent taking it off. I did use the proper tool, so I just don't know. Are there any other Fords that use this same pulley I can keep an eye out for while at the junk yard. Not trying to go around any SC vendors or private sellers, I will be at the junk yard for my sons parts so thought I would take a look see for my part.

the-big-e
01-28-2013, 11:50 PM
The PS pullys are 8 rib pulleys and are only used on the SC.....

90whtbrd
01-29-2013, 12:51 AM
Thanks for the reply. Will take a look at the junk yard since I'll be there anyway, but with that pulley being used on the SC only my chances look to be somewhere between slim and nil. Thanks again for the input. Looks like my next post will be in the parts wanted section.

the-big-e
01-29-2013, 06:04 PM
I have a few of them.....

PM me if you need one....

90whtbrd
01-30-2013, 05:37 AM
Can't seem to send pm, is your inbox full or is my ancient computer failing me. I keep hitting send and my screen is not showing it was sent.

the-big-e
01-30-2013, 06:03 PM
I got it.....

14 times.....:p :eek:

PM sent.....

90whtbrd
01-31-2013, 06:51 AM
Sorry for the duplicates. PM sent.